Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X80-50SB
The AirTAC Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X80-50SB is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø80mm bore and 80mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ80 mm
- Full stroke80 mm
- Port sizePT3/8
- Adjuster threadM20×1.5
About the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X80-50SB
The AirTAC ACQJ80X80-50SB is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend end position. You can fine-tune the usable extend stroke anywhere from 30 mm up to the full 80 mm directly on the machine, while the retract stroke remains completely unaffected. Because the piston area is unchanged, the output force is identical to a standard ACQ of this bore.
This 80 mm bore model features a 25 mm piston rod, PT3/8 porting, and a male M22x1.5 rod-end thread (-B) that couples directly to your load. The integrated magnet (-S) works with reed or electronic solid-state switches, and fixed elastomer bumpers handle end-of-stroke deceleration.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X80-50SB Technical Specifications
| Model | Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X80-50SB |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Full stroke | 80 mm |
| Adjuster thread | M20×1.5 |
| Port size | PT3/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M16×2.0 (F) / M22×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X80-50SB
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X80-50SB Is Used
Machining Center Chucks
Dial in the exact clamping extend position on a CNC fixture without machining new spacers, allowing rapid adaptation for raw blanks of varying thicknesses.
Carton Sealing Heads
Adjust the pressing height of a sealing jaw on the fly during product changeover, accommodating different box sizes without swapping pneumatic hardware.
Press Tonnage Setup
Set trial end positions for a light assembly press, safely testing the 30-80 mm stroke window before locking the M20x1.5 adjuster nut for production runs.
Is the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X80-50SB the Right Cylinder?
Providing 2513.2 N push and 2267.8 N pull force at 0.5 MPa (3518.5 N push at 0.7 MPa), this 80 mm bore sits between the 63 mm (1558.6 N push) and 100 mm (3927.0 N push) sizes. If the end position never varies, a fixed-stroke ACQ suffices; otherwise, this ACQJ is ideal. Confirm your ordering essentials: 80 mm bore, 80 mm full stroke, 50 mm adjuster window, -S magnet, and -B male M22x1.5 rod thread.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X80-50SB FAQ
It delivers 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. The full stroke is 80 mm with a 50 mm window, giving a usable extend range of 30-80 mm. The adjuster thread is M20x1.5, the rod end is male M22x1.5, and the port is PT3/8.
No, the external threaded stop only limits how far the rod extends, leaving the piston area and force unchanged. The cylinder uses fixed NBR elastomer bumpers at each end for deceleration rather than adjustable air cushions, so for high-speed or high-energy loads you should add an external shock absorber.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X80-50SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.