This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ASE32X10B — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ASE32X10B in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ASP Single Acting Guided Compact Cylinder ASP32X10B
The AirTAC Airtac ASP Single Acting Guided Compact Cylinder ASP32X10B is a single acting, push (spring return) DIN-standard tight/compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ASE32X10B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeSingle acting, push (spring return)
- Rod threadM8×1.25
- StatusDiscontinued → ASE32X10B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ASP Single Acting Guided Compact Cylinder ASP32X10B
A single acting push cylinder with spring return, the ASP32X10B extends its 12 mm rod with compressed air and retracts it by spring, so one air line is all the plumbing needs. The 32 mm bore delivers 352.5 N of push at 0.5 MPa and 513.4 N at 0.7 MPa, both already net of the return spring, and it starts moving from just 0.2 MPa. The male rod thread (B code) bolts straight to I/Y knuckles on linked tooling. This model is discontinued; the current-production replacement is the ASE32X10.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into cramped jigs and guarding where a full-length body will not fit. In practice, plan on about 211 N (roughly 21 kgf) of usable push at 0.5 MPa, enough to lift about 18 kg vertically with a 2:1 margin. A fixed TPU bumper sits at both ends, the hard-anodized aluminium body carries a 1/8" port, and speed runs 50-500 mm/s. No magnet is fitted on this code; order the -S version if you need CMSE / DMSE switch sensing.
Airtac ASP Single Acting Guided Compact Cylinder ASP32X10B Technical Specifications
| Model | Airtac ASP Single Acting Guided Compact Cylinder ASP32X10B |
|---|---|
| Series | ASP DIN compact cylinder (discontinued) |
| Replacement | ASE32X10B |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Single acting, push (spring return) |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ASE32X10B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force (spring return) |
|---|---|
| 0.5 MPa | 352.5 N |
| 0.7 MPa | 513.4 N |
Single-acting push: air extends the rod; the return spring retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ASP Single Acting Guided Compact Cylinder ASP32X10B
| ASP | DIN compact cylinder (single-acting push, spring-return, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ASP Single Acting Guided Compact Cylinder ASP32X10B Is Used
Bench press ejection
Ejects stamped brackets off a small die on a bench press, using the 352.5 N push at 0.5 MPa over a 10 mm kick-off stroke.
Presence clamping
Clamps a machined housing into a CNC drilling fixture; the spring retracts the clamp automatically whenever shop air drops.
Chute diverter push
Pushes small packages between two conveyor chutes in a packaging line, with the short body fitting inside the chute frame.
Replacing the Airtac ASP Single Acting Guided Compact Cylinder ASP32X10B with the ASE32X10B
At 352.5 N push at 0.5 MPa, this 32 mm bore sits between the 25 mm bore (210.1 N) and the 40 mm bore (556.8 N); step up only if your fixture needs the extra force. The 10 mm stroke suits short eject or clamp moves, and the spring returns the rod home on air loss rather than holding a mid-stroke position. Mount with FA/FB flange, LB foot or CA/CB clevis brackets, and remember the male rod thread of the B code. For new designs, specify the ASE32X10 instead and confirm the ISO 21287 mounting dimensions before the swap.
Replacement checklist
- ✓ Current-production ACE → ASE32X10B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ASP Single Acting Guided Compact Cylinder ASP32X10B FAQ
Push is 352.5 N at 0.5 MPa and 513.4 N at 0.7 MPa, both figures already net of the return spring. Minimum working pressure is 0.2 MPa, the operating range is 0.2-1.0 MPa (28-145 psi) with 1.5 MPa (215 psi) proof pressure, and speed runs 50-500 mm/s on air filtered to 40 um. The bore is 32 mm, the stroke is 10 mm, the rod is 12 mm with a male thread, and the port is 1/8" PT.
Not on this code. The ASP32X10B has no magnet fitted; the optional -S magnet code is what enables CMSE or DMSE reed and solid-state switches. Also note this model is discontinued, so for new builds order the ASE32X10, which matches the same bore, stroke and force class - just confirm the ISO 21287 mounting dimensions first.
Request a Quote for the ASE32X10B
Send us the quantity and destination. We confirm price, stock and lead time on the ASE32X10B replacement — usually within 7-8 hours.