This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ASE32X10S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ASE32X10S in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ASP Single Acting Guided Compact Cylinder ASP32X10S
The AirTAC Airtac ASP Single Acting Guided Compact Cylinder ASP32X10S is a single acting, push (spring return) DIN-standard tight/compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ASE32X10S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeSingle acting, push (spring return)
- Rod threadM8×1.25
- StatusDiscontinued → ASE32X10S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ASP Single Acting Guided Compact Cylinder ASP32X10S
The ASP32X10S is a single acting push cylinder with spring return: air extends the 12 mm rod and the built-in spring retracts it to the home position, so only one air line is needed. At 0.5 MPa this 32 mm bore delivers 352.5 N of push already net of the spring, rising to 513.4 N at 0.7 MPa, and it starts working from just 0.2 MPa. The S code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clipped straight onto the body for end-of-stroke signalling.
This is a DIN-standard compact body in hard-anodized aluminium with an S45C hard-chrome rod and fixed TPU bumpers at both ends, and the short build saves about 50% of the mounting length of an ISO 15552 profile cylinder - ideal for tight jigs and guarding. In practice, plan on roughly 211 N (about 21 kg) of usable push at 0.5 MPa, which vertically lifts around 18 kg with a 2:1 margin. Note this model is discontinued: the current-production drop-in is the ASE32X10, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ASP Single Acting Guided Compact Cylinder ASP32X10S Technical Specifications
| Model | Airtac ASP Single Acting Guided Compact Cylinder ASP32X10S |
|---|---|
| Series | ASP DIN compact cylinder (discontinued) |
| Replacement | ASE32X10S |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Single acting, push (spring return) |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ASE32X10S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force (spring return) |
|---|---|
| 0.5 MPa | 352.5 N |
| 0.7 MPa | 513.4 N |
Single-acting push: air extends the rod; the return spring retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ASP Single Acting Guided Compact Cylinder ASP32X10S
| ASP | DIN compact cylinder (single-acting push, spring-return, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ASP Single Acting Guided Compact Cylinder ASP32X10S Is Used
Bench-top press jig
A 10 mm stroke and 352.5 N push at 0.5 MPa suits quick staking or marking of small aluminium brackets on an assembly bench, with one solenoid valve and one air line.
Carton reject pusher
On a packaging line, the spring return clears the pusher from the belt path the moment air is lost, and the fitted -S magnet with a DMSE switch confirms the retract position each cycle.
Fixture clamp in a tight die
The compact body, roughly half the length of an ISO 15552 profile cylinder, slots into clamping pockets in a small stamping fixture where a full-length body would not fit.
Replacing the Airtac ASP Single Acting Guided Compact Cylinder ASP32X10S with the ASE32X10S
Size the job both ways: if 352.5 N at 0.5 MPa is more than you need, the 25 mm bore gives 210.1 N; if you need more, the 40 mm bore reaches 556.8 N at the same pressure. The 10 mm stroke suits short clamp or eject moves, and the female M8x1.25 rod thread takes standard I/Y knuckles. Remember the spring drives the rod home on air loss - it will not hold a mid-stroke position. FA/FB flange, LB foot and CA/CB clevis mounts bolt to the same face, and CMSE/DMSE switches work because this unit carries the -S magnet. Order the ASE32X10 as the current replacement.
Replacement checklist
- ✓ Current-production ACE → ASE32X10S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ASP Single Acting Guided Compact Cylinder ASP32X10S FAQ
It is a single acting push, spring-return cylinder: push is 352.5 N at 0.5 MPa and 513.4 N at 0.7 MPa, both already net of the return spring. Working pressure is 0.2-1.0 MPa (28-145 psi) with a 1.5 MPa (215 psi) proof pressure, minimum 0.2 MPa to overcome the spring, speed 50-500 mm/s, air filtered to 40 um, and -20 to +70 C operation. Port is 1/8" (PT), rod thread is female M8x1.25.
Order the ASE32X10: swap the P for an E and you get the current-production ISO 21287 compact cylinder in the same 32 mm bore, 10 mm stroke and force class. The ASP is DIN-standard, so verify the ISO 21287 mounting dimensions before swapping, and remember the -S magnet on this unit is what allows CMSE / DMSE switch mounting.
Request a Quote for the ASE32X10S
Send us the quantity and destination. We confirm price, stock and lead time on the ASE32X10S replacement — usually within 7-8 hours.