Airtac ATE Single Acting Guided Compact Cylinder ATE16X15B
The AirTAC Airtac ATE Single Acting Guided Compact Cylinder ATE16X15B is a genuine single acting, pull (spring return) ISO 21287 compact air cylinder with a Ø16mm bore and 15mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ16 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeSingle acting, pull (spring return)
- Rod threadM4×0.7
- CushionFixed TPU bumper (both ends)
About the Airtac ATE Single Acting Guided Compact Cylinder ATE16X15B
This AirTAC ATE16X15B is a single acting pull cylinder, meaning the spring extends the rod and air retracts it, with a net pull of 53.3 N at 0.5 MPa. Its ISO 21287 compact body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight machine guards and gantries where a full-length cylinder would not.
With a 16 mm bore and 15 mm stroke, this unit has a male rod thread (B code) and an M5x0.8 port. The hard-anodized aluminium body and S45C hard-chrome rod resist wear, while the fixed TPU bumper at both ends absorbs end-of-stroke impact. For a safe working load, plan for about 32 N of real work at 0.5 MPa, which translates to lifting roughly 3.3 kg vertically with a 2:1 margin.
Airtac ATE Single Acting Guided Compact Cylinder ATE16X15B Technical Specifications
| Model | Airtac ATE Single Acting Guided Compact Cylinder ATE16X15B |
|---|---|
| Series | ATE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø16 mm |
| Stroke | 15 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 53.3 N |
| 0.7 MPa | 83.5 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa. Single-acting strokes are short (Ø12 to 10 mm, Ø16-100 to 25 mm).
Model Code: Airtac ATE Single Acting Guided Compact Cylinder ATE16X15B
| ATE | ISO 21287 compact cylinder (single-acting pull, spring-return). |
|---|---|
| 16 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ATE Single Acting Guided Compact Cylinder ATE16X15B Is Used
Jig Clamping Retract
Use this cylinder to retract a locating pin in a CNC fixture. The 53.3 N pull at 0.5 MPa is enough to clear a small pin, and the compact body fits under the worktable without protruding.
Small Gate Latch
In a packaging line, this unit can pull a latch to release a small access door. The 15 mm stroke matches the latch travel, and the spring return keeps the door closed when air is off.
Tensioner Release
On a light conveyor, mount this cylinder to pull a belt tensioner arm back for maintenance. The short stroke and compact size let it fit beside the drive pulley, and the TPU bumper prevents hard stops.
Is the Airtac ATE Single Acting Guided Compact Cylinder ATE16X15B the Right Cylinder?
Choose this ATE16X15B when you need a compact pull action with a short 15 mm stroke. For lighter duty, the ATE12X10 offers a 25.9 N pull at 0.5 MPa, while the ATE20X25 provides a stronger 88.1 N pull at 0.5 MPa if you need more force. Since this is a spring-extend cylinder, it returns to the extended position on air loss and does not hold a mid-stroke position. The male rod thread suits direct coupling, and the M5x0.8 port works with standard fittings. Note that this model has no magnet, so it cannot accept CMSE or DMSE sensors; order the -S code if you need that option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Single-acting: do not force the rod against the spring.
- check Installation by qualified personnel per AirTAC docs.
Airtac ATE Single Acting Guided Compact Cylinder ATE16X15B FAQ
The ATE16X15B delivers a net pull of 53.3 N at 0.5 MPa and 83.5 N at 0.7 MPa, with the spring force already subtracted. The minimum working pressure is 0.2 MPa, and the proof pressure is 1.5 MPa (215 psi). Operating pressure range is 0.2-1.0 MPa (28-145 psi), and speed is 50-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this unit fits into machine guards and gantries with limited clearance. The fixed TPU bumper at both ends absorbs end-of-stroke energy, and the M5x0.8 port simplifies piping. This model has no magnet, so sensors are not available unless you order the -S option.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ATE Single Acting Guided Compact Cylinder ATE16X15B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.