Airtac ATE Single Acting Guided Compact Cylinder ATE16X5B
The AirTAC Airtac ATE Single Acting Guided Compact Cylinder ATE16X5B is a genuine single acting, pull (spring return) ISO 21287 compact air cylinder with a Ø16mm bore and 5mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ16 mm
- Stroke5 mm
- Port sizeM5×0.8
- Acting typeSingle acting, pull (spring return)
- Rod threadM4×0.7
- CushionFixed TPU bumper (both ends)
About the Airtac ATE Single Acting Guided Compact Cylinder ATE16X5B
This AirTAC ATE16X5B is a single acting pull cylinder with spring return, so the spring extends the rod and air retracts it. With a 16 mm bore and 5 mm stroke, it delivers a net pull of 53.3 N at 0.5 MPa, enough for light clamping or indexing tasks.
The ISO 21287 compact body is about 50% shorter than an ISO 15552 profile cylinder, saving space in tight fixtures. The hard-anodized aluminium body and S45C hard-chrome rod resist wear, while the fixed TPU bumper absorbs end-of-stroke impact. For a safe vertical lift, plan for about 3.3 kg (53.3 N x 0.6 / 9.81) at 0.5 MPa, not the full rating.
Airtac ATE Single Acting Guided Compact Cylinder ATE16X5B Technical Specifications
| Model | Airtac ATE Single Acting Guided Compact Cylinder ATE16X5B |
|---|---|
| Series | ATE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø16 mm |
| Stroke | 5 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 53.3 N |
| 0.7 MPa | 83.5 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa. Single-acting strokes are short (Ø12 to 10 mm, Ø16-100 to 25 mm).
Model Code: Airtac ATE Single Acting Guided Compact Cylinder ATE16X5B
| ATE | ISO 21287 compact cylinder (single-acting pull, spring-return). |
|---|---|
| 16 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ATE Single Acting Guided Compact Cylinder ATE16X5B Is Used
Small Jig Clamping
Use the 53.3 N pull to retract a clamp pin in a benchtop assembly jig, freeing a part after a manual step. The compact body fits under a workholding plate without protruding.
Valve Actuation
Retract a small spool or lever in a pneumatic control panel. The 5 mm stroke matches the travel of miniature valves, and the spring return ensures a safe extended position on air loss.
Sorting Gate
Pull a diverter flap in a light conveyor sorting station. The 16 mm bore delivers enough force to move a thin plastic guide, while the short stroke cycles quickly at 50-500 mm/s.
Is the Airtac ATE Single Acting Guided Compact Cylinder ATE16X5B the Right Cylinder?
Choose this ATE16X5B when you need a compact pull action with a short 5 mm stroke and a male rod thread (B code). The M5x0.8 port suits small-bore circuits, and the spring-return design keeps the rod extended at rest, which is handy for fail-safe release. For a lighter pull, the ATE12X10 offers 25.9 N at 0.5 MPa, while the ATE20X25 provides 88.1 N if you need more force. This model has no magnet, so sensors cannot be mounted unless you order the -S option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Single-acting: do not force the rod against the spring.
- check Installation by qualified personnel per AirTAC docs.
Airtac ATE Single Acting Guided Compact Cylinder ATE16X5B FAQ
The ATE16X5B delivers a net pull of 53.3 N at 0.5 MPa and 83.5 N at 0.7 MPa, both after accounting for the return spring. Minimum working pressure is 0.2 MPa, and proof pressure is 1.5 MPa (215 psi). Operating temperature is -20 to +70 C, with a speed range of 50-500 mm/s.
Yes, the ATE16X5B uses an ISO 21287 compact body that is about 50% shorter than an ISO 15552 profile cylinder, making it ideal for tight jigs and guards. It has a fixed TPU bumper at both ends to absorb impact, and the male rod thread (B) simplifies mounting. Note that this model has no magnet; order the -S code for sensor capability.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ATE Single Acting Guided Compact Cylinder ATE16X5B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.