Airtac ATE Single Acting Guided Compact Cylinder ATE16X5SB
The AirTAC Airtac ATE Single Acting Guided Compact Cylinder ATE16X5SB is a genuine single acting, pull (spring return) ISO 21287 compact air cylinder with a Ø16mm bore and 5mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ16 mm
- Stroke5 mm
- Port sizeM5×0.8
- Acting typeSingle acting, pull (spring return)
- Rod threadM4×0.7
- CushionFixed TPU bumper (both ends)
About the Airtac ATE Single Acting Guided Compact Cylinder ATE16X5SB
This AirTAC ATE16X5SB is a single acting pull cylinder with a spring return, meaning the spring extends the rod and air retracts it. Its 16 mm bore delivers a net pull of 53.3 N at 0.5 MPa, making it a compact solution for light pulling tasks.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, fitting into tight spaces. The optional -S magnet is fitted here, enabling CMSE or DMSE switches for position sensing. For a safe vertical lift, plan for roughly 3.3 kg (53.3 N x 0.6 / 9.81) to maintain a 2:1 margin.
Airtac ATE Single Acting Guided Compact Cylinder ATE16X5SB Technical Specifications
| Model | Airtac ATE Single Acting Guided Compact Cylinder ATE16X5SB |
|---|---|
| Series | ATE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø16 mm |
| Stroke | 5 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 53.3 N |
| 0.7 MPa | 83.5 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa. Single-acting strokes are short (Ø12 to 10 mm, Ø16-100 to 25 mm).
Model Code: Airtac ATE Single Acting Guided Compact Cylinder ATE16X5SB
| ATE | ISO 21287 compact cylinder (single-acting pull, spring-return). |
|---|---|
| 16 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ATE Single Acting Guided Compact Cylinder ATE16X5SB Is Used
Small Jig Clamping
Use the ATE16X5SB to pull a small locating pin or clamp in a benchtop assembly jig, where its short stroke and compact body fit within a tight fixture envelope.
Light Guard Latch
In a packaging line, this cylinder can retract a lightweight plexiglass guard latch. The 53.3 N pull is ample for small, low-inertia safety doors.
Lab Sample Indexer
In a laboratory test rig, use it to pull a small sample tray into position for inspection. The 5 mm stroke provides precise, repeatable movement for a probe or sensor.
Is the Airtac ATE Single Acting Guided Compact Cylinder ATE16X5SB the Right Cylinder?
For a smaller option, the ATE12X5 offers a 25.9 N pull at 0.5 MPa, while the ATE20X5 provides 88.1 N. This model operates from a minimum of 0.2 MPa, and the spring returns the rod to its extended position on air loss, not holding a mid-stroke load. It features a male rod thread (B code) and an M5x0.8 port.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Single-acting: do not force the rod against the spring.
- check Installation by qualified personnel per AirTAC docs.
Airtac ATE Single Acting Guided Compact Cylinder ATE16X5SB FAQ
The ATE16X5SB provides a net pull force of 53.3 N at 0.5 MPa and 83.5 N at 0.7 MPa. These figures are net of the return spring. The minimum working pressure is 0.2 MPa, and the proof pressure is 1.5 MPa (215 psi).
The ISO 21287 body is about 50% shorter than an ISO 15552 profile cylinder, saving valuable mounting space. It has a fixed TPU bumper at both ends to absorb energy, and the optional -S magnet allows for CMSE or DMSE switch mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ATE Single Acting Guided Compact Cylinder ATE16X5SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.