Airtac ATE Single Acting Guided Compact Cylinder ATE25X10S
The AirTAC Airtac ATE Single Acting Guided Compact Cylinder ATE25X10S is a genuine single acting, pull (spring return) ISO 21287 compact air cylinder with a Ø25mm bore and 10mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ25 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeSingle acting, pull (spring return)
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
About the Airtac ATE Single Acting Guided Compact Cylinder ATE25X10S
This ATE25X10S is a single acting pull cylinder with spring return, so the spring extends the rod and air retracts it, giving a net pull of 170.9 N at 0.5 MPa and 253.3 N at 0.7 MPa. The compact ISO 21287 body is about 50% shorter than an ISO 15552 profile cylinder, making it ideal for tight fixtures where space is limited.
With the optional -S magnet fitted, you can mount CMSE or DMSE switches for position sensing, and the hard-anodized aluminium body with S45C chrome rod ensures durability. For a 2:1 safety margin, this cylinder can lift about 8.7 kg vertically at 0.5 MPa, so plan your real workload around that figure rather than the full rating.
Airtac ATE Single Acting Guided Compact Cylinder ATE25X10S Technical Specifications
| Model | Airtac ATE Single Acting Guided Compact Cylinder ATE25X10S |
|---|---|
| Series | ATE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 10 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 170.9 N |
| 0.7 MPa | 253.3 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa. Single-acting strokes are short (Ø12 to 10 mm, Ø16-100 to 25 mm).
Model Code: Airtac ATE Single Acting Guided Compact Cylinder ATE25X10S
| ATE | ISO 21287 compact cylinder (single-acting pull, spring-return). |
|---|---|
| 25 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ATE Single Acting Guided Compact Cylinder ATE25X10S Is Used
Jig Clamping
Use in a CNC fixture to pull a clamp down on a workpiece, with the 10 mm stroke and 170.9 N force securing small parts during milling.
Label Applicator
Retract a label applicator head in a packaging line, where the compact body fits between guide rails and the spring return resets the head after each cycle.
Parts Ejector
Pull a pin to eject a stamped part from a die, using the CMSE switch to confirm retraction, and the short stroke suits high-cycle automated presses.
Is the Airtac ATE Single Acting Guided Compact Cylinder ATE25X10S the Right Cylinder?
For lighter tasks, the ATE20X10S offers 88.1 N pull at 0.5 MPa, while the ATE32X10S provides 296.0 N, so choose based on your required force. This 25 mm bore with 10 mm stroke is a short-stroke option, and the spring returns the rod to extended on air loss, but it does not hold a mid-stroke position. Mounting options include FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, and FTC brackets, plus I/Y rod knuckles.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Single-acting: do not force the rod against the spring.
- check Installation by qualified personnel per AirTAC docs.
Airtac ATE Single Acting Guided Compact Cylinder ATE25X10S FAQ
The ATE25X10S provides a net pull of 170.9 N at 0.5 MPa and 253.3 N at 0.7 MPa, with the spring force already subtracted. Minimum working pressure is 0.2 MPa, and proof pressure is 1.5 MPa (215 psi).
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits in tight spaces. The fixed TPU bumper absorbs end-of-stroke energy, and the optional -S magnet enables CMSE/DMSE switches for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ATE Single Acting Guided Compact Cylinder ATE25X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.