Airtac ATE Single Acting Guided Compact Cylinder ATE32X10S
The AirTAC Airtac ATE Single Acting Guided Compact Cylinder ATE32X10S is a genuine single acting, pull (spring return) ISO 21287 compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeSingle acting, pull (spring return)
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
About the Airtac ATE Single Acting Guided Compact Cylinder ATE32X10S
This AirTAC ATE32X10S is a single acting pull cylinder with spring return, so the spring extends the rod and air retracts it, delivering a net pull of 296 N at 0.5 MPa. The ISO 21287 compact body is about 50% shorter than an ISO 15552 profile cylinder, fitting into tight machine guards and gantries where space is limited.
With the optional -S magnet fitted, this model accepts CMSE or DMSE reed and solid-state switches for position sensing. The hard-anodized aluminium body and S45C hard-chrome rod resist wear, while the fixed TPU bumper at both ends absorbs end-of-stroke impact. For a safe vertical lift, plan for about 18 kg at 0.5 MPa, using a 2:1 margin on the 296 N rating.
Airtac ATE Single Acting Guided Compact Cylinder ATE32X10S Technical Specifications
| Model | Airtac ATE Single Acting Guided Compact Cylinder ATE32X10S |
|---|---|
| Series | ATE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 296.0 N |
| 0.7 MPa | 434.2 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa. Single-acting strokes are short (Ø12 to 10 mm, Ø16-100 to 25 mm).
Model Code: Airtac ATE Single Acting Guided Compact Cylinder ATE32X10S
| ATE | ISO 21287 compact cylinder (single-acting pull, spring-return). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ATE Single Acting Guided Compact Cylinder ATE32X10S Is Used
Jig Clamping
Retract a locating pin in a CNC fixture with 296 N pull at 0.5 MPa, holding parts securely during drilling or milling cycles.
Small Guard Retraction
Pull back a lightweight safety guard on a packaging line, using the spring to extend it back into place when air is removed.
Gantry Positioning
Retract a sensor or probe on a gantry system, with the compact body fitting tight spaces and the -S magnet providing position feedback.
Is the Airtac ATE Single Acting Guided Compact Cylinder ATE32X10S the Right Cylinder?
Choose this 32 mm bore for light pull applications needing up to 296 N at 0.5 MPa, such as clamping or retracting a small guard. If you need less force, the 25 mm bore pulls 170.9 N at 0.5 MPa; for more, the 40 mm bore pulls 500.3 N. The 10 mm stroke suits short movements, and the spring returns the rod to extended on air loss, but it does not hold a mid-stroke position. Mounting options include FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, and FTC brackets, with the -S magnet enabling CMSE/DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Single-acting: do not force the rod against the spring.
- check Installation by qualified personnel per AirTAC docs.
Airtac ATE Single Acting Guided Compact Cylinder ATE32X10S FAQ
At 0.5 MPa, the net pull is 296 N; at 0.7 MPa, it is 434.2 N, both after accounting for the return spring. The minimum working pressure is 0.2 MPa, and the proof pressure is 1.5 MPa (215 psi).
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, making it ideal for tight jigs and guards. The fixed TPU bumper absorbs end-of-stroke energy, and the optional -S magnet allows CMSE or DMSE switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ATE Single Acting Guided Compact Cylinder ATE32X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.