Airtac ATE Single Acting Guided Compact Cylinder ATE50X15B
The AirTAC Airtac ATE Single Acting Guided Compact Cylinder ATE50X15B is a genuine single acting, pull (spring return) ISO 21287 compact air cylinder with a Ø50mm bore and 15mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ50 mm
- Stroke15 mm
- Port size1/8"
- Acting typeSingle acting, pull (spring return)
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
About the Airtac ATE Single Acting Guided Compact Cylinder ATE50X15B
This AirTAC ATE50X15B is a single acting pull cylinder, spring-extend type, with a 50 mm bore and 15 mm stroke. It delivers a net pull of 775 N at 0.5 MPa, so it suits light assembly tasks where a compact package is key.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, fitting tight gantries and machine guards. With a male rod thread (B code) and no magnet fitted, it is ready for direct coupling; order the optional -S code if you need CMSE or DMSE sensor feedback later.
Airtac ATE Single Acting Guided Compact Cylinder ATE50X15B Technical Specifications
| Model | Airtac ATE Single Acting Guided Compact Cylinder ATE50X15B |
|---|---|
| Series | ATE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 15 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 775.0 N |
| 0.7 MPa | 1127.5 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa. Single-acting strokes are short (Ø12 to 10 mm, Ø16-100 to 25 mm).
Model Code: Airtac ATE Single Acting Guided Compact Cylinder ATE50X15B
| ATE | ISO 21287 compact cylinder (single-acting pull, spring-return). |
|---|---|
| 50 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ATE Single Acting Guided Compact Cylinder ATE50X15B Is Used
Jig Clamping
Use the 775 N pull to retract a clamp arm in a drill jig, holding small parts firmly during machining. The compact body fits under a worktable where a longer cylinder would not.
Gate Stop
Mount on a conveyor side rail to pull a stop pin down, allowing a box to pass. The spring extends the pin to block the next item, and the 15 mm stroke is enough for a thin package.
Test Fixture
In a quality lab, retract a probe or sensor holder to load a sample. The 50 mm bore provides reliable force, and the male rod thread simplifies attaching a custom tip.
Is the Airtac ATE Single Acting Guided Compact Cylinder ATE50X15B the Right Cylinder?
Choose this 50 mm bore for a net pull of 775 N at 0.5 MPa, which handles moderate clamping or lifting jobs. If you need less force, the 40 mm bore pulls 500.3 N at 0.5 MPa; for more, the 63 mm bore pulls 1320 N at 0.5 MPa. The spring extends the rod at rest, so it does not hold a mid-stroke position on air loss; plan for a 0.2 MPa minimum to overcome the spring.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Single-acting: do not force the rod against the spring.
- check Installation by qualified personnel per AirTAC docs.
Airtac ATE Single Acting Guided Compact Cylinder ATE50X15B FAQ
At 0.5 MPa, the net pull is 775 N; at 0.7 MPa, it is 1127.5 N. These figures already subtract the return spring force. Minimum working pressure is 0.2 MPa, and the proof pressure is 1.5 MPa (215 psi).
No, this model has no magnet, so CMSE or DMSE switches cannot be mounted. You would need to order the ATE50X15SB version, which includes the optional -S magnet for sensor feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ATE Single Acting Guided Compact Cylinder ATE50X15B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.