Airtac ATE Single Acting Guided Compact Cylinder ATE63X10
The AirTAC Airtac ATE Single Acting Guided Compact Cylinder ATE63X10 is a genuine single acting, pull (spring return) ISO 21287 compact air cylinder with a Ø63mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke10 mm
- Port size1/8"
- Acting typeSingle acting, pull (spring return)
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ATE Single Acting Guided Compact Cylinder ATE63X10
This AirTAC ATE63X10 is a single acting pull cylinder with a spring return, meaning the spring extends the rod and air retracts it, delivering a net pull of 1320 N at 0.5 MPa. Its ISO 21287 compact body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight machine guards and gantries where a full-length unit would not.
With a 63 mm bore and 10 mm stroke, this model uses a 1/8" port and a hard-anodized aluminium body with a hard-chrome S45C steel rod. The fixed TPU bumper at both ends absorbs end-of-stroke impact, and the optional -S magnet enables CMSE or DMSE sensors for position detection, but this unit has no magnet fitted.
Airtac ATE Single Acting Guided Compact Cylinder ATE63X10 Technical Specifications
| Model | Airtac ATE Single Acting Guided Compact Cylinder ATE63X10 |
|---|---|
| Series | ATE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 1320.0 N |
| 0.7 MPa | 1903.2 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa. Single-acting strokes are short (Ø12 to 10 mm, Ø16-100 to 25 mm).
Model Code: Airtac ATE Single Acting Guided Compact Cylinder ATE63X10
| ATE | ISO 21287 compact cylinder (single-acting pull, spring-return). |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ATE Single Acting Guided Compact Cylinder ATE63X10 Is Used
Jig Clamping
Use the ATE63X10 to pull a clamp closed on a CNC fixture, where the 1320 N pull at 0.5 MPa secures parts up to about 80 kg, and the short body fits under a machine guard.
Package Ejector
In a packaging line, this cylinder retracts a stop or diverter to release boxes, with the spring extending it back to the home position when air is off, saving space on a crowded conveyor.
Gantry Retract
On a pick-and-place gantry, the ATE63X10 pulls a tool or gripper upward, and its compact ISO 21287 body allows it to mount in a low-profile carriage without interfering with other axes.
Is the Airtac ATE Single Acting Guided Compact Cylinder ATE63X10 the Right Cylinder?
For a lighter pull, consider the ATE50X25 with 775 N at 0.5 MPa, or step up to the ATE80X25 for 2159.1 N. This 63 mm bore suits applications needing moderate force in a short envelope, but remember it is single acting pull only - it does not hold a mid-stroke position on air loss, as the spring returns the rod to extended. Mounting options include FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, and FTC brackets, all fitting the ISO 21287 face.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Single-acting: do not force the rod against the spring.
- check Installation by qualified personnel per AirTAC docs.
Airtac ATE Single Acting Guided Compact Cylinder ATE63X10 FAQ
The ATE63X10 delivers a net pull of 1320 N at 0.5 MPa and 1903.2 N at 0.7 MPa, with the spring force already subtracted. Operating pressure is 0.2-1.0 MPa (28-145 psi), proof pressure is 1.5 MPa (215 psi), and speed range is 50-500 mm/s.
Yes, it is an ISO 21287 compact cylinder with a body about 50% shorter than an ISO 15552 profile cylinder, saving mounting space. It has a fixed TPU bumper at both ends. Sensors like CMSE or DMSE are only possible if you order the optional -S magnet; this model has no magnet, so no sensor can be mounted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ATE Single Acting Guided Compact Cylinder ATE63X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.