Airtac ATE Single Acting Guided Compact Cylinder ATE63X10SB
The AirTAC Airtac ATE Single Acting Guided Compact Cylinder ATE63X10SB is a genuine single acting, pull (spring return) ISO 21287 compact air cylinder with a Ø63mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke10 mm
- Port size1/8"
- Acting typeSingle acting, pull (spring return)
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
About the Airtac ATE Single Acting Guided Compact Cylinder ATE63X10SB
A single acting pull cylinder with spring return, the ATE63X10SB keeps the rod extended at rest and uses air to retract it. At 0.5 MPa the 63 mm bore delivers 1320 N of pull net of the spring, rising to 1903.2 N at 0.7 MPa, so it clamps or grips with real force while staying fail-safe to the extended home position on air loss. The body is hard-anodized aluminium with a roller-burnished bore, matched to an S45C hard-chrome plated 16 mm rod.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this cylinder slots into tight guarding and fixture plates where a full-length body will not go. This S-coded unit carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clipped to the body to signal the retracted position. A fixed TPU bumper at each end absorbs end-of-stroke shock. Working range is 0.2-1.0 MPa (28-145 psi) with a 1.5 MPa (215 psi) proof pressure, and speed runs 50-500 mm/s.
Airtac ATE Single Acting Guided Compact Cylinder ATE63X10SB Technical Specifications
| Model | Airtac ATE Single Acting Guided Compact Cylinder ATE63X10SB |
|---|---|
| Series | ATE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 1320.0 N |
| 0.7 MPa | 1903.2 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa. Single-acting strokes are short (Ø12 to 10 mm, Ø16-100 to 25 mm).
Model Code: Airtac ATE Single Acting Guided Compact Cylinder ATE63X10SB
| ATE | ISO 21287 compact cylinder (single-acting pull, spring-return). |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ATE Single Acting Guided Compact Cylinder ATE63X10SB Is Used
Clamp-and-release on a welding fixture
The spring holds the clamp closed on a car-body bracket while the welder cycles; 1320 N of pull at 0.5 MPa retracts the jaw in 10 mm for loading, and a power cut leaves the part clamped.
Part ejector on a press bench
A 10 mm kick drops a finished bushing out of a locating nest between press strokes; the short ISO 21287 body fits under the tooling plate where a full-length profile cylinder cannot.
Gated chute diverter with position signal
Because this unit carries the -S magnet, a DMSE switch on the body confirms the gate has retracted before the PLC releases the next batch of granules down the sorting chute.
Is the Airtac ATE Single Acting Guided Compact Cylinder ATE63X10SB the Right Cylinder?
At 0.5 MPa this bore pulls 1320 N net of the spring, which is about 134 kgf; halve it for margin and you can lift roughly 67 kg vertically, so match the part weight accordingly. If your load is lighter, the 50 mm bore gives 775 N at 0.5 MPa; if you need more, step up to the 80 mm bore at 2159.1 N. Remember the spring only returns the rod to its extended home position - it will not hold a mid-stroke position, so use a stop or a double acting ACE cylinder where intermediate holding matters. Male rod thread (B) and PT ports are fitted here; FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot and FTC brackets plus I/Y knuckles bolt straight to the ISO 21287 face.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Single-acting: do not force the rod against the spring.
- check Installation by qualified personnel per AirTAC docs.
Airtac ATE Single Acting Guided Compact Cylinder ATE63X10SB FAQ
It is a single acting pull cylinder: the spring extends the rod and air retracts it. Pull force is net of the return spring: 1320 N at 0.5 MPa and 1903.2 N at 0.7 MPa on the 63 mm bore. Minimum working pressure is 0.2 MPa (needed to overcome the spring), the range is 0.2-1.0 MPa (28-145 psi), proof pressure is 1.5 MPa (215 psi), speed is 50-500 mm/s, and the stroke is 10 mm with a 16 mm rod and 1/8" PT port.
The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it suits shallow fixtures and guarded assemblies. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount directly in the body slots to report the retracted position. A fixed TPU bumper at each end absorbs end-of-stroke shock, and FA/FB flange, LB foot, CA/CB clevis, CR, SDB or FTC mounts bolt to the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ATE Single Acting Guided Compact Cylinder ATE63X10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.