This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ATE63X5S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ATE63X5S in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ATP Single Acting Port Compact Cylinder ATP63X5S
The AirTAC Airtac ATP Single Acting Port Compact Cylinder ATP63X5S is a single acting, pull (spring return) DIN-standard tight/compact air cylinder with a Ø63mm bore and 5mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ATE63X5S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke5 mm
- Port size1/8"
- Acting typeSingle acting, pull (spring return)
- Rod threadM10×1.5
- StatusDiscontinued → ATE63X5S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ATP Single Acting Port Compact Cylinder ATP63X5S
A single acting pull cylinder with spring extend, the ATP63X5S keeps the rod normally extended and uses air at 0.2 MPa minimum to retract it over a 5 mm stroke. At 0.5 MPa it delivers 1320 N of pull net of the spring, rising to 1903.2 N at 0.7 MPa, from a 63 mm bore with a 16 mm rod and a 1/8" PT port. Because this is a discontinued model, plan your swap to the current-production ATE63X5, which matches the same bore, stroke and force class.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight clamping nests and guarded stations. The S code means the optional -S magnet is fitted on this unit, so CMSE or DMSE reed or solid-state switches can be added for end-of-stroke signal. For sizing, treat roughly 792 N (about 81 kg) as the practical pull at 0.5 MPa, or expect it to lift about 67 kg vertically with a 2:1 margin. Fixed TPU bumpers at both ends, hard-anodized aluminium body, S45C hard-chrome rod, speed 50-500 mm/s.
Airtac ATP Single Acting Port Compact Cylinder ATP63X5S Technical Specifications
| Model | Airtac ATP Single Acting Port Compact Cylinder ATP63X5S |
|---|---|
| Series | ATP DIN compact cylinder (discontinued) |
| Replacement | ATE63X5S |
| Bore size | Ø63 mm |
| Stroke | 5 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ATE63X5S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 1320.0 N |
| 0.7 MPa | 1903.2 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ATP Single Acting Port Compact Cylinder ATP63X5S
| ATP | DIN compact cylinder (single-acting pull, spring-return, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ATP Single Acting Port Compact Cylinder ATP63X5S Is Used
Spring-extended clamp on a CNC fixture
The spring holds a aluminium housing against a stop while air at 0.5 MPa pulls the 1320 N clamp aside for loading; a 5 mm stroke is all the clearance the fixture needs.
Signalled hold-open gate on a packaging line
With the fitted -S magnet and a DMSE switch, the PLC confirms the rod is retracted before cartons pass; on air loss the spring re-extends and blocks the lane safely.
Ejector pin retraction in a small press die
Air retracts the ejector plate against the spring between cycles; the 1903.2 N pull at 0.7 MPa handles the strip force, and the short body fits inside the die shoe.
Replacing the Airtac ATP Single Acting Port Compact Cylinder ATP63X5S with the ATE63X5S
Size between bores: a 50 mm bore gives 775 N pull at 0.5 MPa, while stepping up to 80 mm reaches 2159.1 N, so the 63 mm at 1320 N sits in the middle for medium clamping or holding jobs. Remember the spring returns the rod to extended on air loss and will not hold a mid-stroke position. Mount with FA/FB flange, LB foot or CA/CB clevis brackets, and keep the -S magnet if you need CMSE / DMSE switching. Order the ATE63X5 as the drop-in successor and confirm ISO 21287 mounting dimensions before the swap.
Replacement checklist
- ✓ Current-production ACE → ATE63X5S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ATP Single Acting Port Compact Cylinder ATP63X5S FAQ
This 63 mm bore, 5 mm stroke spring-extend cylinder pulls with 1320 N at 0.5 MPa and 1903.2 N at 0.7 MPa, both figures net of the return spring. Working range is 0.2-1.0 MPa (28-145 psi) with 1.5 MPa (215 psi) proof pressure, air filtered to 40 um, temperature -20 to +70 C, speed 50-500 mm/s, rod 16 mm with M10x1.5 female thread and a 1/8" PT port.
Order the ATE63X5, the current-production ISO 21287 successor: swap the P for an E and you get the same bore, stroke and force class in a short compact body. Confirm the ISO 21287 mounting dimensions against your fixture before swapping, since the ATP was built to a DIN-standard compact footprint. The ATE also accepts the FA/FB, LB and CA/CB mounting family.
Request a Quote for the ATE63X5S
Send us the quantity and destination. We confirm price, stock and lead time on the ATE63X5S replacement — usually within 7-8 hours.