This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ATE80X15 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ATE80X15 in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ATP Single Acting Port Compact Cylinder ATP80X15
The AirTAC Airtac ATP Single Acting Port Compact Cylinder ATP80X15 is a single acting, pull (spring return) DIN-standard tight/compact air cylinder with a Ø80mm bore and 15mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ATE80X15 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke15 mm
- Port size1/4"
- Acting typeSingle acting, pull (spring return)
- Rod threadM12×1.75
- StatusDiscontinued → ATE80X15
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ATP Single Acting Port Compact Cylinder ATP80X15
A single acting pull cylinder with spring return, the ATP80X15 keeps its rod extended by an internal spring and retracts it when compressed air is applied at 0.2 MPa or higher. The 80 mm bore delivers a net pull of 2159.1 N at 0.5 MPa and 3101.6 N at 0.7 MPa, already measured against the spring, so the figures you see are the figures you get at the rod. This model is discontinued; the current-production successor is the ATE80X15, which swaps the P for an E and matches the same bore, stroke and force class.
The short ISO 21287-style body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits tight machine frames and guarding where a full-length body will not fit. For planning, treat about 1295 N (0.6 of the 0.5 MPa rating) as the realistic working pull, and note the rod can support roughly 110 kg vertically once you halve the 220 kgf equivalent for a 2:1 margin. A fixed TPU bumper sits at both ends, the hard-anodized aluminium body carries a 20 mm S45C hard-chrome rod, and the female M12x1.75 rod thread plus 1/4" PT ports keep plumbing straightforward.
Airtac ATP Single Acting Port Compact Cylinder ATP80X15 Technical Specifications
| Model | Airtac ATP Single Acting Port Compact Cylinder ATP80X15 |
|---|---|
| Series | ATP DIN compact cylinder (discontinued) |
| Replacement | ATE80X15 |
| Bore size | Ø80 mm |
| Stroke | 15 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ATE80X15 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 2159.1 N |
| 0.7 MPa | 3101.6 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ATP Single Acting Port Compact Cylinder ATP80X15
| ATP | DIN compact cylinder (single-acting pull, spring-return, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ATP Single Acting Port Compact Cylinder ATP80X15 Is Used
Press-unloader hooks
The 2159.1 N spring-extended pull at 0.5 MPa retracts latch hooks on stamping and forming presses when air is applied, and the spring drops them back to the safe extended home the moment air is lost.
Bottle-line gate return
A 15 mm stroke is enough to swing short reject gates on a bottling conveyor; the spring holds the gate open by default and the 80 mm bore pulls it closed against product back-pressure.
Fixture clamp release
On CNC fixture plates, the normally-extended rod releases swing clamps only while air is supplied, so a power failure leaves every part clamped; about 110 kg vertical equivalent covers heavy workpieces.
Replacing the Airtac ATP Single Acting Port Compact Cylinder ATP80X15 with the ATE80X15
At 80 mm bore you are near the top of this family: 2159.1 N net pull at 0.5 MPa. If your load needs less, the 63 mm bore pulls about 1320 N at 0.5 MPa; if you need more, the 100 mm bore reaches about 3395 N. The 15 mm stroke is within the standard range for this bore, so no made-to-order stroke is needed. Because the spring only returns the rod to its extended home position on air loss, it will not hold a mid-stroke position - add an external stop if you need one. FA/FB flange, LB foot and CA/CB clevis mounts bolt to the same face, and if you want position sensing, order the -S code for the optional magnet so CMSE or DMSE switches can be used. For new projects, specify the ATE80X15 and confirm the ISO 21287 mounting dimensions before swapping.
Replacement checklist
- ✓ Current-production ACE → ATE80X15
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ATP Single Acting Port Compact Cylinder ATP80X15 FAQ
Net of the return spring, the 80 mm bore pulls 2159.1 N at 0.5 MPa and 3101.6 N at 0.7 MPa. Minimum working pressure is 0.2 MPa (28 psi), the operating range is 0.2-1.0 MPa (28-145 psi), proof pressure is 1.5 MPa (215 psi), speed is 50-500 mm/s, temperature is -20 to +70 C, and the air must be filtered to 40 um. The spring extends the rod; air retracts it.
It is a compact short-body cylinder with a hard-anodized aluminium body, a 20 mm S45C hard-chrome rod with a female M12x1.75 thread, 1/4" PT ports and a fixed TPU bumper at each end that decelerates the rod at the ends of travel. The body saves about 50% of the mounting length of an ISO 15552 profile cylinder. There is no magnet fitted as standard; add the -S code to the order and CMSE or DMSE switches can then ride the body. The model is discontinued, so the ATE80X15 is the drop-in replacement - confirm the ISO 21287 mounting dimensions before you swap.
Request a Quote for the ATE80X15
Send us the quantity and destination. We confirm price, stock and lead time on the ATE80X15 replacement — usually within 7-8 hours.