This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ATE80X25S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ATE80X25S in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ATP Single Acting Port Compact Cylinder ATP80X25S
The AirTAC Airtac ATP Single Acting Port Compact Cylinder ATP80X25S is a single acting, pull (spring return) DIN-standard tight/compact air cylinder with a Ø80mm bore and 25mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ATE80X25S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke25 mm
- Port size1/4"
- Acting typeSingle acting, pull (spring return)
- Rod threadM12×1.75
- StatusDiscontinued → ATE80X25S
About the Airtac ATP Single Acting Port Compact Cylinder ATP80X25S
A single acting pull cylinder with spring return, the ATP80X25S keeps its 80 mm bore rod extended at rest and uses compressed air to retract it. At 0.5 MPa it delivers 2159.1 N of pull net of the spring (3101.6 N at 0.7 MPa), so 0.2 MPa is the minimum needed to beat the spring. As a short-body ISO 21287 class unit it saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight clamping fixtures and machine guards. Note: the ATP family is discontinued; the current-production drop-in is the ATE80X25.
This S-coded model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be mounted directly on the hard-anodized aluminium body for end-of-stroke detection. The 20 mm S45C hard-chrome rod ends in a female M12x1.75 thread, air is supplied through a 1/4" port, and fixed TPU bumpers at both ends absorb the return. For planning, treat about 1295 N (roughly 66 kg vertical) as the realistic working pull at 0.5 MPa instead of the full rating.
Airtac ATP Single Acting Port Compact Cylinder ATP80X25S Technical Specifications
| Model | Airtac ATP Single Acting Port Compact Cylinder ATP80X25S |
|---|---|
| Series | ATP DIN compact cylinder (discontinued) |
| Replacement | ATE80X25S |
| Bore size | Ø80 mm |
| Stroke | 25 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ATE80X25S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 2159.1 N |
| 0.7 MPa | 3101.6 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ATP Single Acting Port Compact Cylinder ATP80X25S
| ATP | DIN compact cylinder (single-acting pull, spring-return, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ATP Single Acting Port Compact Cylinder ATP80X25S Is Used
Press die retraction
Retracts a die slide or stripper plate in a stamping press; the spring holds the tool open whenever plant air drops, a fail-safe posture for die changes.
Fixture clamp release
Pulls locking pins out of CNC machining fixtures between cycles, with a DMSE switch confirming full retraction before the pallet indexer fires.
Gate latch on packaging lines
Opens carton gates and diverters on a packaging conveyor; the normally-extended spring keeps lanes clear during an emergency stop.
Replacing the Airtac ATP Single Acting Port Compact Cylinder ATP80X25S with the ATE80X25S
Size against the 0.5 MPa pull of 2159.1 N: the 63 mm bore in this family gives 1320.0 N if the load is lighter, while the 100 mm bore reaches 3395.3 N for heavier retraction work. Keep strokes within the short single-acting range and run 50-500 mm/s. If you need a normally-extended fail position with mid-stroke holding, this spring-return design will not hold position on air loss - consider the double acting ACE/ATE instead. Choose FA/FB flange, LB foot or CA/CB clevis to match the fixture, and keep the S code if CMSE/DMSE switching is required. Before ordering, confirm the ISO 21287 mounting dimensions of the ATE80X25 replacement against your drawing.
Replacement checklist
- ✓ Current-production ACE → ATE80X25S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ATP Single Acting Port Compact Cylinder ATP80X25S FAQ
At 0.5 MPa the net pull (already minus the return spring) is 2159.1 N, rising to 3101.6 N at 0.7 MPa. Operating pressure is 0.2-1.0 MPa (28-145 psi) with 1.5 MPa (215 psi) proof, and speed range is 50-500 mm/s. A practical planning figure is about 1295 N of real work at 0.5 MPa, equivalent to lifting roughly 66 kg vertically with a margin.
The S means the optional -S magnet is fitted on this unit, so AirTAC CMSE or DMSE reed and solid-state switches can be clamped to the body for position signals. The ATP family itself is discontinued: the current-production drop-in is the ATE80X25 (same 80 mm bore, 25 mm stroke and force class). Confirm the ISO 21287 mounting dimensions before swapping, since the ATP is DIN-standard.
Request a Quote for the ATE80X25S
Send us the quantity and destination. We confirm price, stock and lead time on the ATE80X25S replacement — usually within 7-8 hours.