This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ATE80X5 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ATE80X5 in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ATP Single Acting Port Compact Cylinder ATP80X5
The AirTAC Airtac ATP Single Acting Port Compact Cylinder ATP80X5 is a single acting, pull (spring return) DIN-standard tight/compact air cylinder with a Ø80mm bore and 5mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ATE80X5 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke5 mm
- Port size1/4"
- Acting typeSingle acting, pull (spring return)
- Rod threadM12×1.75
- StatusDiscontinued → ATE80X5
About the Airtac ATP Single Acting Port Compact Cylinder ATP80X5
A single acting pull cylinder with spring return, the ATP80X5 keeps its 20 mm rod extended by a spring and retracts it with compressed air, so it fails to the extended home position if air is lost. At 0.5 MPa it pulls 2159.1 N net of the spring, rising to 3101.6 N at 0.7 MPa, and it needs at least 0.2 MPa to overcome the spring. The 5 mm stroke suits short clamping or release moves at 50-500 mm/s. Note this model is discontinued; the current-production replacement is the ATE80X5 (swap the P for an E), which matches the same bore, stroke and force class.
The hard-anodized aluminium body with an S45C hard-chrome rod is a short ISO 21287 compact build that saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight machine frames and guarded stations. Because the body is so short, plan on roughly 1295 N (about 130 kg) of real work at 0.5 MPa rather than the full 2159.1 N rating, and expect it to lift about 110 kg vertically with a 2:1 margin. Fixed TPU bumpers decelerate the rod at both ends, the port is 1/4", and the rod end carries a female M12x1.75 thread. No magnet is fitted on this code, so no switch can be mounted; order the -S variant if you need CMSE or DMSE sensors.
Airtac ATP Single Acting Port Compact Cylinder ATP80X5 Technical Specifications
| Model | Airtac ATP Single Acting Port Compact Cylinder ATP80X5 |
|---|---|
| Series | ATP DIN compact cylinder (discontinued) |
| Replacement | ATE80X5 |
| Bore size | Ø80 mm |
| Stroke | 5 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ATE80X5 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 2159.1 N |
| 0.7 MPa | 3101.6 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ATP Single Acting Port Compact Cylinder ATP80X5
| ATP | DIN compact cylinder (single-acting pull, spring-return, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ATP Single Acting Port Compact Cylinder ATP80X5 Is Used
Press-tool unclamp
Spring holds fixture clamps closed on a 200-tonne stamping die; 0.5 MPa air pulling 2159.1 N retracts the pins 5 mm for die change, and air loss leaves the die safely clamped.
Gate release on a packaging line
The normally extended rod blocks a product gate; a short air pulse pulls it clear for one carton, and the spring re-extends it in under 50 ms of cycle time.
Fail-safe interlock on a CNC fixture
Mounted by FB flange inside a guarded enclosure, the cylinder keeps a safety latch extended whenever plant air drops, satisfying the interlock logic without a lockout valve.
Replacing the Airtac ATP Single Acting Port Compact Cylinder ATP80X5 with the ATE80X5
Size against the numbers: the 80 mm bore pulls 2159.1 N at 0.5 MPa, while a 63 mm bore in the same family manages 1320.0 N and a 100 mm bore reaches 3395.3 N, so step up or down depending on your release or unclamp load. Remember the spring returns the rod to extended on air loss and will not hold a mid-stroke position, so do not use it to park a load. Mounting brackets in the FA/FB flange, LB foot and CA/CB clevis family bolt to the standard face, and the optional -S magnet enables CMSE / DMSE switches. Before ordering, confirm the ISO 21287 mounting dimensions of the ATE80X5 replacement, since this ATP is a DIN-standard compact body.
Replacement checklist
- ✓ Current-production ACE → ATE80X5
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ATP Single Acting Port Compact Cylinder ATP80X5 FAQ
It is a single acting pull cylinder: the spring extends the rod and air retracts it. Pull force is net of the return spring - 2159.1 N at 0.5 MPa and 3101.6 N at 0.7 MPa on the 80 mm bore. At least 0.2 MPa is needed to beat the spring, pressure range is 0.2-1.0 MPa (28-145 psi) with 1.5 MPa (215 psi) proof, speed is 50-500 mm/s, and the 5 mm stroke is within the standard range for this bore. On air loss the spring returns the rod to extended; it does not hold a mid-stroke position.
Order the ATE80X5, the current-production ISO 21287 successor: swap the P for an E and you get the same 80 mm bore, 5 mm stroke and force class in a short compact body that saves roughly 50% of the mounting length of an ISO 15552 profile cylinder. Confirm the ISO 21287 mounting dimensions against your fixture before swapping, because the ATP was built to a DIN-standard compact pattern. Also note the rod thread is female M12x1.75 and the port is 1/4" on both models.
Request a Quote for the ATE80X5
Send us the quantity and destination. We confirm price, stock and lead time on the ATE80X5 replacement — usually within 7-8 hours.