This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ATE80X5B — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ATE80X5B in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ATP Single Acting Port Compact Cylinder ATP80X5B
The AirTAC Airtac ATP Single Acting Port Compact Cylinder ATP80X5B is a single acting, pull (spring return) DIN-standard tight/compact air cylinder with a Ø80mm bore and 5mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ATE80X5B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke5 mm
- Port size1/4"
- Acting typeSingle acting, pull (spring return)
- Rod threadM12×1.75
- StatusDiscontinued → ATE80X5B
About the Airtac ATP Single Acting Port Compact Cylinder ATP80X5B
This is a single acting pull cylinder of the DIN-standard compact family: a return spring holds the 20 mm rod extended, and compressed air retracts it. The 80 mm bore delivers a net pull of 2159.1 N at 0.5 MPa (3101.6 N at 0.7 MPa, spring already deducted), with a minimum working pressure of 0.2 MPa needed to overcome the spring. The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into cramped clamping fixtures and machine frames. This model is discontinued; the current-production replacement is ATE80X5.
Because the spring is always working against the air side, plan your load around about 1295 N of usable force at 0.5 MPa rather than the full rating - that is roughly 132 kg of real work capacity. In vertical terms the rod can lift about 220 kg at 0.5 MPa, or about 110 kg with a 2:1 margin, which is a practical ceiling for a 5 mm eject or clamp move. The hard-anodized aluminium body carries a fixed TPU bumper at both ends, the S45C rod ends in a male thread (the B code), and the 1/4" port suits the 80 mm bore. No magnet is fitted on this version, so position switches cannot be mounted; order the -S code if you need CMSE / DMSE sensing.
Airtac ATP Single Acting Port Compact Cylinder ATP80X5B Technical Specifications
| Model | Airtac ATP Single Acting Port Compact Cylinder ATP80X5B |
|---|---|
| Series | ATP DIN compact cylinder (discontinued) |
| Replacement | ATE80X5B |
| Bore size | Ø80 mm |
| Stroke | 5 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ATE80X5B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 2159.1 N |
| 0.7 MPa | 3101.6 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ATP Single Acting Port Compact Cylinder ATP80X5B
| ATP | DIN compact cylinder (single-acting pull, spring-return, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ATP Single Acting Port Compact Cylinder ATP80X5B Is Used
Press die part ejection
The spring pushes finished blanks out of a shallow die cavity on the up-stroke; air retracts the rod so the next blank can load. 2159.1 N at 0.5 MPa clears steel parts in a 5 mm move.
Fixture clamp retraction
Normally-extended spring clamping on a CNC jig: air pulls the clamp arm back for loading, and a power or air failure leaves the workpiece clamped in the safe extended state.
Carton hold-down on a case packer
A short 5 mm stroke holds carton flaps down at a gluing station; the compact body fits under a low guard where a full-length cylinder will not.
Replacing the Airtac ATP Single Acting Port Compact Cylinder ATP80X5B with the ATE80X5B
Size the job two ways: if 2159.1 N at 0.5 MPa is more than you need, the 63 mm bore pulls about 1320 N at the same pressure; if you need more, the 100 mm bore reaches about 3395 N. Remember the spring returns the rod to its extended home position on air loss and will not hold a mid-stroke setting. Mounting brackets (FA/FB flange, LB foot, CA/CB clevis) bolt to the standard face, and the optional -S magnet enables CMSE / DMSE switches if you reorder. Since this unit is discontinued, spec the ATE80X5 as the drop-in and confirm the ISO 21287 mounting dimensions before swapping.
Replacement checklist
- ✓ Current-production ACE → ATE80X5B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ATP Single Acting Port Compact Cylinder ATP80X5B FAQ
Net pull (spring already deducted) is 2159.1 N at 0.5 MPa and 3101.6 N at 0.7 MPa. Keep real work to about 1295 N at 0.5 MPa (roughly 132 kg of capacity), or lift about 110 kg vertically with a 2:1 margin. Operating range is 0.2-1.0 MPa (28-145 psi), proof 1.5 MPa (215 psi), speed 50-500 mm/s, air filtered to 40 um, -20 to +70 C. The 1/4" port matches the 80 mm bore and the rod has a male thread.
Order ATE80X5, the current-production ISO 21287 successor: swap the P for an E and you get the same 80 mm bore, 5 mm stroke and force class with a matching short body and mounting family. Because the ATP was built to a DIN-standard compact pattern, confirm the ISO 21287 mounting dimensions against your fixture before the swap. Also note the -S magnet is an option on the replacement if you need CMSE / DMSE switch sensing.
Request a Quote for the ATE80X5B
Send us the quantity and destination. We confirm price, stock and lead time on the ATE80X5B replacement — usually within 7-8 hours.