Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X25S
The AirTAC Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X25S is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 25mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
- BoreØ32 mm
- Stroke25 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM8×1.25 (F) / M14×1.5 (B)
- ConfigurationStandard compact
About the Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X25S
The AirTAC B01-ACQ32X25S is a double-acting, single-rod JIS compact cylinder engineered for tight axial spaces. The B01- prefix designates this as an application-dedicated, customer-specified variant of the standard ACQ32X25S, meaning it shares the exact same physical specifications while being grouped for specific industry builds. It delivers a robust 402.1 N push force at 0.5 MPa alongside a 301.6 N pull force.
This 32 mm bore unit relies on a short C-clip and riveted body construction to minimize mounting depth. It features a 16 mm piston rod, a PT1/8 port, and a default female M8x1.25 rod-end thread. Because this SKU includes the -S option, it contains a built-in piston magnet compatible with AirTAC reed or electronic switches fitted into the body grooves. End-stopping is handled by a fixed NBR elastomer bumper rather than an adjustable air cushion.
Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X25S Technical Specifications
| Model | Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X25S |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X25S
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Where the Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X25S Is Used
PCB Depaneling Ejector
Uses the 402.1 N extend force to push separated circuit boards out of a routing fixture, where the 25 mm stroke keeps the overall machine profile extremely narrow.
Small Carton Flap Folder
Deploys the 16 mm rod to tuck top flaps on a packaging line, operating reliably at speeds between 30 and 500 mm/s without needing adjustable air cushions.
Electronic Component Sorting
Leverages the -S magnet and body grooves to trigger solid-state sensors, verifying piston position when diverting parts into specific bins.
Is the Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X25S the Right Cylinder?
When sizing this actuator, consider stepping down to the 25 mm bore if your load requires less energy, which provides a 245.4 N push at 0.5 MPa. Conversely, if your application demands greater thrust, the next size up is the 40 mm bore, yielding a 628.3 N push at 0.5 MPa. Remember that a plain compact cylinder like this does not hold its position if air pressure drops or the valve is centered; the rod will drift, and the fixed bumper only decelerates it near the stroke end. For fail-safe load holding, an external rod lock or pilot-operated check valve is required. To order, confirm the 32 mm bore, 25 mm stroke, PT1/8 port, female M8x1.25 rod thread, and the required -S magnet option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X25S FAQ
This 32 mm bore double-acting cylinder provides a push force of 402.1 N and a pull force of 301.6 N at 0.5 MPa. At 0.7 MPa, the push force increases to 562.9 N, with a maximum push capacity of 82 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa and a speed range of 30-500 mm/s.
The B01- prefix simply marks this as an application-dedicated, customer-specified variant of the ACQ32X25S; it is mechanically identical to the base model. It does not have adjustable air cushions; instead, it uses a fixed NBR elastomer bumper at each end to absorb impact. For high-speed or high-energy loads, you should add an external shock absorber or slow the approach speed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X25S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.