Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X60B
The AirTAC Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X60B is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 60mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
- BoreØ32 mm
- Stroke60 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM8×1.25 (F) / M14×1.5 (B)
- ConfigurationStandard compact
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X60B
The B01-ACQ32X60B is a double-acting JIS compact cylinder delivering 402.1 N push and 301.6 N pull at 0.5 MPa. The leading B01- prefix designates this as an AirTAC application-dedicated (customer-specified) variant, mechanically identical to the standard ACQ32X60B. It utilizes a short C-clip and riveted body architecture to minimize axial footprint, fitting easily where round-body units cannot.
This specific unit includes a male M14x1.5 piston rod thread for direct load coupling and uses a PT1/8 port. Instead of an adjustable air cushion, it relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact. The body features integrated magnetic-switch grooves, though this particular SKU ships without the internal magnet.
Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X60B Technical Specifications
| Model | Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X60B |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X60B
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Where the Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X60B Is Used
Package Diverting
Pushes light cartons on a packaging line with 402.1 N of extend force, utilizing the 60 mm stroke to clear the conveyor belt path.
Component Seating
Presses small bearings into housings on an assembly machine, taking advantage of the male M14x1.5 rod end for a secure tooling attachment.
PCB Fixture Clamping
Secures electronic panels during testing, saving valuable axial depth inside tight machinery enclosures due to its short C-clip body.
Is the Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X60B the Right Cylinder?
When sizing this 32 mm bore actuator, stepping down to a 25 mm bore yields 245.4 N push, while stepping up to a 40 mm bore provides 628.3 N push at 0.5 MPa. Because this is a double-acting compact cylinder, it does not hold its position if air pressure is lost or the valve is centered; the rod will drift. For fail-safe load holding, an external rod lock or pilot-operated check valve is required. To order, confirm the 32 mm bore, 60 mm stroke, PT1/8 port, male M14x1.5 rod thread, and no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X60B FAQ
At 0.5 MPa, the push force is 402.1 N and the pull force is 301.6 N. At 0.7 MPa, the push force is 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, and the speed range is 30-500 mm/s.
The B01- prefix indicates this is an AirTAC application-dedicated (customer-specified) line of the base ACQ32X60B, sharing identical physical specs. It does not have adjustable air cushions; it uses fixed NBR elastomer bumpers at both stroke ends to decelerate the piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ32X60B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.