Airtac B01-MA Special Cylinder B01-MA20X100SU
AirTAC B01-MA Series Special Purpose Cylinder B01-MA20X100SU Technical Details
- Full Model Code: B01-MA20X100SU
- Bore Size: 20mm (ISO 6432 standard)
- Stroke: 100mm (±0.5mm tolerance)
- Operation Type: Double-acting with magnetic piston
- Operating Pressure: 0.1–0.9 MPa (1–9 bar)
- Cushioning: Adjustable air cushion at both ends
- Mounting Type: Basic front flange (NF series compatible)
- Port Size: G1/8 (BSPP thread) with M5x0.8 optional
- Piston Speed: 50–800 mm/s (lubricated condition)
- Ambient Temperature: -20℃ to +80℃
- Material:
- Tube: Hard anodized aluminum alloy
- Piston Rod: Stainless steel SUS304
- Seals: Nitrile rubber (NBR) standard
- Weight: 0.63kg (without accessories)
- Dimensions:
- Total Length (L): 194mm (stroke + end caps)
- Body Width (W): 40mm (square tube profile)
- Height (H): 40mm (mounting surface to port center)
- IP Rating: IP65 (standard wiper seal)
- Inductive Sensor Compatibility: M9/M12 proximity sensors
High-precision industrial cylinder featuring wear-resistant chromium-plated piston rod and integrated magnet for position feedback. The dual sealing system combines metal wipers for particle exclusion and lip seals for minimal leakage. Optimized flow paths enable rapid response times (≤50ms at 0.5MPa).
- High-cycle automation: PCB assembly machines, pick-and-place units
- Precision clamping systems in CNC fixtures
- Vertical lifting mechanisms in packaging lines
- Cleanroom applications (optional FKM seals available)
- Textile machinery thread tension control
Maintenance Protocol: Lubricate every 5 million cycles with ISO VG32 turbine oil.
Avoid side-load forces exceeding 15N. For vertical mounting, install air exhaust
filters to prevent condensate ingress.
- Allow 15mm clearance for sensor mounting
- Use shock absorbers when stroke exceeds 50mm
- Pair with AS-Series flow controls for speed optimization
| Property | Property Value |
|---|---|
| sku | B01-MA20X100SU |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.