Airtac B01-MA Special Cylinder B01-MA32X60SU
The AirTAC Airtac B01-MA Special Cylinder B01-MA32X60SU is a genuine double acting standard round-body mini air cylinder with a Ø0mm bore and 60mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ0 mm
- Stroke60 mm
- Port sizePT/G
- Acting typeDouble acting
- Rod thread
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-MA Special Cylinder B01-MA32X60SU
A 32 mm bore round-body mini cylinder with a 60 mm stroke and a U flat-end back cover, the MA32X60SU pushes with 402.2 N and pulls with 345.6 N at 0.5 MPa (22-145 psi range) - enough muscle for clamping and short-stroke press tasks on compact machines. Air drives the rod in both directions, and fixed anti-impact pads soften each stroke end without any adjustment. The riveted stainless barrel shrugs off mild corrosion and washdown, a real edge over painted-steel minis in damp or food-adjacent spots, while the hard-chrome plated 12 mm rod resists wear through millions of cycles. For sizing, keep real work near 241 N at 0.5 MPa, which means it lifts about 20 kg vertically with a 2:1 margin. A magnet comes built in as standard, so CMSG, DMSG or EMSG switches clip on without ordering a special piston.
Airtac B01-MA Special Cylinder B01-MA32X60SU Technical Specifications
| Model | Airtac B01-MA Special Cylinder B01-MA32X60SU |
|---|---|
| Series | MA mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-MA Special Cylinder B01-MA32X60SU
| MA | Standard round-body mini cylinder (double-acting). |
|---|---|
| 0 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B01-MA Special Cylinder B01-MA32X60SU Is Used
Bearing press on appliance assembly
A 60 mm stroke presses small bearings into washing-machine pump housings; 402 N at 0.5 MPa covers light interference fits at bench speed.
Clamp fixture for CNC secondary ops
Holds aluminium brackets against a drill jig with roughly 241 N of practical clamp force, cycling 30-800 mm/s between parts.
Package kick-off on a carton line
Deflects cartons off a conveyor with a flat-end mount; the stainless barrel tolerates the damp washdown zone around food-grade conveyors.
Is the Airtac B01-MA Special Cylinder B01-MA32X60SU the Right Cylinder?
Step down to a 25 mm bore (245.3 N push at 0.5 MPa) for lighter fixtures, or up to a 40 mm bore (628.3 N) when the job needs double the thrust. Note that this cylinder drifts freely once air is removed - add a rod lock or pilot check valve if the load must stay put between cycles. The U flat-end cover accepts fixed mounting directly; FA flange, LB foot or SDB pivot brackets and I/Y rod knuckles bolt on when the frame needs them.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-MA Special Cylinder B01-MA32X60SU FAQ
At 0.5 MPa it pushes 402.2 N and pulls 345.6 N; at 0.7 MPa those figures rise to 563.0 N and 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. Running pressure spans 0.15-1.0 MPa (22-145 psi), proof pressure is 1.5 MPa (215 psi), speed range is 30-800 mm/s, and the 1/8 port feeds air to a 12 mm hard-chrome rod over a 60 mm stroke.
The U version gives a fixed, flat mounting face that bolts straight to a machine plate with no pivot bracket, keeping the riveted round body close to the frame. The 32 mm bore shares the same stainless barrel construction and standard built-in magnet as every MA model, so position sensing via CMSG, DMSG or EMSG switches needs no extra-order piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-MA Special Cylinder B01-MA32X60SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.