Airtac B01-SDA Dedicated Cylinder B01-SDA32X15B
The AirTAC Airtac B01-SDA Dedicated Cylinder B01-SDA32X15B is a genuine double-acting COMPACT (thin) air cylinder with a Ø32mm bore and 15mm stroke, PT1/8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
- BoreØ32 mm
- Stroke15 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM6×1.0 (F) / M10×1.25 (B)
- CushionFixed NBR bumper (both ends)
About the Airtac B01-SDA Dedicated Cylinder B01-SDA32X15B
The AirTAC B01-SDA32X15B is a double-acting, single-rod compact cylinder. The leading "B01-" prefix marks this as an application-dedicated (customer-specified) variant, mechanically identical to the standard SDA32X15B. It delivers 402.1 N of push force and 345.6 N of pull force at 0.5 MPa, operating within a 0.15-1.0 MPa pressure range.
This unit features a male M10x1.25 piston rod thread for secure load coupling and a PT1/8 port. Its riveted body design minimizes axial mounting depth, making it highly effective for tight machinery footprints. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion.
Airtac B01-SDA Dedicated Cylinder B01-SDA32X15B Technical Specifications
| Model | Airtac B01-SDA Dedicated Cylinder B01-SDA32X15B |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-SDA Dedicated Cylinder B01-SDA32X15B
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac B01-SDA Dedicated Cylinder B01-SDA32X15B Is Used
PCB Router Clamping
Secures printed circuit board panels during routing operations where the 15 mm stroke and 402.1 N force provide firm holding without flexing the substrate.
Carton Flap Folding
Actuates short-throw folding arms on packaging lines to tuck end flaps prior to sealing, fitting neatly into compact machine frames.
Sensor Block Ejection
Pushes machined sensor housings out of an CNC fixture, using the male M10x1.25 rod end to attach a custom non-marring contact pad.
Is the Airtac B01-SDA Dedicated Cylinder B01-SDA32X15B the Right Cylinder?
For sizing, stepping down to the SDA25 yields 245.4 N push at 0.5 MPa, while stepping up to the SDA40 provides 628.3 N. Based on the 402.1 N push figure, the safe working load is approximately 241 N (60% capacity), translating to a vertical lift capability of about 20.5 kg with a 2:1 safety margin. Confirm your ordering essentials: 32 mm bore, 15 mm stroke, PT1/8 port, male M10x1.25 rod thread, and no sensor magnet. Note that this plain cylinder drifts if air pressure is lost; holding a load requires an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-SDA Dedicated Cylinder B01-SDA32X15B FAQ
At 0.5 MPa, the push force is 402.1 N and the pull force is 345.6 N. At 0.7 MPa, the push force is 563 N and the pull force is 483.8 N. The theoretical maximum push force is 82 kgf at 1.0 MPa, which is the maximum operating pressure.
The B01- prefix designates an application-dedicated (customer-specified) line that is mechanically identical to the base SDA32X15B. It uses a fixed NBR bumper at each end to decelerate the stroke, not an adjustable air cushion. For high-speed cycling, you should add an external shock absorber or slow the approach speed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-SDA Dedicated Cylinder B01-SDA32X15B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.