Airtac B01-SDA Dedicated Cylinder B01-SDA63X30B
The AirTAC Airtac B01-SDA Dedicated Cylinder B01-SDA63X30B is a genuine double-acting COMPACT (thin) air cylinder with a Ø63mm bore and 30mm stroke, PT1/4 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
- BoreØ63 mm
- Stroke30 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM10×1.5 (F) / M18×1.5 (B)
- CushionFixed NBR bumper (both ends)
About the Airtac B01-SDA Dedicated Cylinder B01-SDA63X30B
The AirTAC B01-SDA63X30B is a double-acting, single-rod compact cylinder engineered for tight axial spaces. The B01- prefix denotes an application-dedicated (customer-specified) variant of the standard SDA63X30B, meaning it shares the exact same mechanical architecture and physical specs. It delivers a robust 1558.6 N push and 1401.5 N pull at 0.5 MPa, utilizing a hard-anodized 63 mm bore and a two-way piston seal for reliable linear motion.
This specific configuration includes a male-threaded M18x1.5 piston rod end (denoted by the B option) for secure mechanical load coupling, paired with a 20 mm rod diameter. The short riveted body significantly reduces mounting depth compared to round-body alternatives. End-of-stroke deceleration is handled by fixed NBR bumpers rather than adjustable cushions, and because this SKU lacks the S magnet option, it cannot host magnetic position switches.
Airtac B01-SDA Dedicated Cylinder B01-SDA63X30B Technical Specifications
| Model | Airtac B01-SDA Dedicated Cylinder B01-SDA63X30B |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-SDA Dedicated Cylinder B01-SDA63X30B
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac B01-SDA Dedicated Cylinder B01-SDA63X30B Is Used
Injection Mold Ejection
Provides the 1558.6 N extend force required to eject dense plastic parts from injection molding tools, with the short riveted body fitting within tight mold platens.
Corrugated Box Flap Folding
Drives the folding mechanism on high-speed packaging lines, utilizing the 30 mm stroke and fixed NBR bumpers to rapidly cycle without requiring complex cushion adjustments.
Woodworking Press Lift
Lifts and lowers lightweight woodworking panels in an assembly press, where the male M18x1.5 thread securely attaches the tooling and the 63 mm bore handles the vertical load.
Is the Airtac B01-SDA Dedicated Cylinder B01-SDA63X30B the Right Cylinder?
When sizing this actuator, evaluate your force requirements carefully. Stepping down, the SDA50 provides 981.7 N of push at 0.5 MPa, whereas stepping up to the SDA80 yields 2513.3 N. The B01-SDA63X30B offers a computed safe working load of roughly 935 N (about 60% of its 1558.6 N capacity) and can vertically lift approximately 79.4 kg with a 2:1 safety margin. Ensure you specify the 63 mm bore, 30 mm stroke, PT1/4 port, and the male M18x1.5 rod thread when ordering.
Keep in mind that a standard compact cylinder like this cannot hold a load if air pressure is lost or the directional valve is centered. The piston will drift, and the fixed NBR bumper only decelerates the stroke near its end without acting as a locking brake. If your application demands static position holding, you must integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-SDA Dedicated Cylinder B01-SDA63X30B FAQ
At 0.5 MPa, the push force is 1558.6 N and the pull force is 1401.5 N. At 0.7 MPa, the push increases to 2182.1 N and the pull to 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a proof pressure of 1.5 MPa, and the operational speed range spans 30-500 mm/s.
The B01- prefix indicates this is an application-dedicated (customer-specified) variant of the standard SDA63X30B, sharing identical physical specifications and dimensions. It does not have an adjustable air cushion; instead, it uses fixed NBR bumpers at both ends to absorb end-stop impact. For high-speed or high-energy cycles, you should add an external shock absorber or slow the approach speed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-SDA Dedicated Cylinder B01-SDA63X30B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.