Airtac B04-SCD Specialized Standard Cylinder for Construction Machinery B04-SCD80X75
The AirTAC Airtac B04-SCD Specialized Standard Cylinder for Construction Machinery B04-SCD80X75 is a genuine double-acting DOUBLE-ROD air cylinder: the Ø25mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø80mm bore, 75mm stroke, PT3/8 ports and adjustable end cushioning.
- BoreØ80 mm
- Rod (both ends)Ø25 mm
- Stroke75 mm
- Port sizePT3/8
- Rod configDouble rod (through)
- CushionAdjustable, 28 mm
About the Airtac B04-SCD Specialized Standard Cylinder for Construction Machinery B04-SCD80X75
The B04-SCD80X75 is AirTAC's construction-machinery dedicated variant of the SCD80X75 double-acting, double-rod cylinder. The B04- prefix designates it for heavy-equipment builders, but mechanically it is identical to the standard SCD80X75. A Ø25 mm piston rod passes through both end caps, yielding identical thrust in both directions: 2268 N at 0.5 MPa and 4082 N at 0.9 MPa.
With a 75 mm stroke and a 257 mm body length A(SCD), this compact unit provides excellent anti-rotation properties and symmetric bearing loads. The adjustable cushion strokes are 28 mm, and the standard PT3/8 ports supply ample flow for the 30-800 mm/s speed range.
Airtac B04-SCD Specialized Standard Cylinder for Construction Machinery B04-SCD80X75 Technical Specifications
| Model | Airtac B04-SCD Specialized Standard Cylinder for Construction Machinery B04-SCD80X75 |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø80 mm |
| Rod diameter | Ø25 mm (both ends) |
| Stroke | 75 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | 3175 N |
| Max (@1.0 MPa) | 463 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B04-SCD Specialized Standard Cylinder for Construction Machinery B04-SCD80X75
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B04-SCD Specialized Standard Cylinder for Construction Machinery B04-SCD80X75 Is Used
Excavator Linkage Actuation
Drives symmetric push/pull movements on heavy-equipment attachments where the B04 construction-machinery prefix ensures suitability for rugged site environments.
Dual-Sided Workholding
Clamps or releases parts from both ends simultaneously using the equal 2268 N force at 0.5 MPa, ensuring balanced gripping on large structural components.
Transfer Shuttle Stops
Uses the rear rod protrusion as a mechanical stopper or sensor flag on a transfer line, taking advantage of the non-rotating through-rod design.
Is the Airtac B04-SCD Specialized Standard Cylinder for Construction Machinery B04-SCD80X75 the Right Cylinder?
Select this 80 mm bore when an application demands 2268 N of equal force both ways, such as a dual-tooling shuttle on an excavator attachment. If your mechanism only requires one-sided pushing, the single-rod SC80X75 is lighter and more cost-effective. For heavy side loads, a dedicated guided cylinder is recommended over relying solely on the through-rod.
To replace this unit, match the 80 mm bore, 75 mm stroke, PT3/8 port thread, basic mounting, and no magnet. Note that the adjustable air cushions only decelerate the piston near end-of-stroke; they do not lock or hold the load. A mechanical lock or external brake is required to maintain position without live air pressure.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B04-SCD Specialized Standard Cylinder for Construction Machinery B04-SCD80X75 FAQ
The B04- prefix indicates this is AirTAC's construction-machinery dedicated line. It is mechanically identical to the standard SCD80X75 double-rod cylinder, offering the same 80 mm bore, 75 mm stroke, and 2268 N equal push/pull force at 0.5 MPa.
A double-rod cylinder provides identical push and pull forces because the rod area is subtracted from both chambers. For the 80 mm bore, this means 2268 N both ways at 0.5 MPa. It also offers better rod guidance, anti-rotation stability, and a rear rod for mounting secondary tooling or sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B04-SCD Specialized Standard Cylinder for Construction Machinery B04-SCD80X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.