Airtac B04-SI Construction Machinery Special ISO Standard Cylinder B04-SI40X200S
AirTAC B04-SI40X200S Construction Machinery ISO Cylinder Specifications
- Model: B04-SI40X200S
- Type: ISO 15552 compliant double-acting cylinder
- Bore size: 40mm
- Stroke: 200mm
- Operating pressure: 0.1–0.9 MPa
- Port size: G1/8 (ISO 228-1 standard)
- Cushioning: Adjustable pneumatic cushion (both ends)
- Seal material: Nitrile rubber (NBR) with wear-resistant band
- Temperature range: -20℃ to 80℃
- Mounting: ISO 15552 mounting interfaces (front flange/rod clevis)
- Protection rating: IP65 (standard wiper included)
- Weight: 2.3kg (excluding accessories)
- Dimensions: 300mm(L) × 80mm(W) × 80mm(H) (fully extended)
- Rod thread: M16×1.5 external thread
- Max piston speed: 0.5–1.5 m/s
- Lubrication: Pre-lubricated (non-repump type)
Heavy-duty cylinder engineered for construction equipment, featuring enhanced corrosion resistance through nickel-plated barrel and chromium-plated piston rod. The reinforced end caps withstand high impact loads typical in excavators and loaders. Integrated magnet slot enables position sensing compatibility. Requires 5μm filtered air with 1-10mg/m³ oil mist content.
- Excavator bucket control mechanisms
- Concrete pump truck outrigger systems
- Drilling rig feed pressure adjustment
- Crane boom locking devices
- Pile driver impact dampening systems
Installation note:
Maintain 0.1–0.3mm clearance between rod end and load during alignment.
For vertical mounting, install with piston rod facing downward to prevent
condensate accumulation. Perform 50–100 low-pressure test cycles before
full operation.
| Property | Property Value |
|---|---|
| sku | B04-SI40X200S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.