Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SCA
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 200mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke200 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SCA
The CA pivot eye on the back cover lets the MAC16X200SCA swing on a clevis without an extra knuckle, handy for tipping chutes and rotating levers on a 200 mm stroke. Double-acting air gives 100.5 N of push and 86.4 N of pull at 0.5 MPa, climbing to 140.7 N at 0.7 MPa, and the needle-set air cushion at both ends tames end-of-stroke shock so quicker cycles stay quiet.
A stainless round barrel rolled to the aluminium covers holds up in rinse-down areas where painted minis blister. Supply it with 0.15-1.0 MPa (22-145 psi) of air filtered to 40 um and the hard-chrome plated 6 mm rod keeps sliding wear low. Derate the 100.5 N rating to about 60 N for real work at 0.5 MPa and the cylinder lifts roughly 5 kg vertically with a 2:1 margin; the standard-built magnet accepts CMSG, DMSG and EMSG switches for position feedback.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SCA Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 200 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SCA Is Used
Grain chute damper flipper
Swings a damper plate open on a hopper diverter; the CA pivot eye mounts straight to a clevis, and the cushion stops the plate slam at each end.
Divert arm on a parcel sorter
Kicks lightweight parcels between lanes; 100.5 N of push at 0.5 MPa moves a 2 kg parcel, and the 200 mm stroke clears the lane width.
Web tensioner swing on a winding machine
Pivots an idler roller to take up slack in film or foil; the pivot back cover removes bracket work and the standard magnet signals the slack position.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SCA the Right Cylinder?
Compare by force: 16 mm gives 100.5 N of push at 0.5 MPa while a 20 mm bore raises that to 157 N if the mechanism later grows. A 200 mm stroke on a 6 mm rod magnifies misalignment, so guide the load externally to protect against rod bending. Once air is released the piston coasts free - a rod lock or pilot check valve holds position where it matters. The CA pivot pairs naturally with an I or Y knuckle; FA flange and LB foot brackets cover fixed faces, and PT, G or NPT threads match your fittings.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SCA FAQ
Push is 100.5 N and pull 86.4 N at 0.5 MPa; at 0.7 MPa it reaches 140.7 N push and 120.9 N pull, with a theoretical ceiling of 20.5 kgf at 1.0 MPa. Supply 0.15-1.0 MPa (22-145 psi) of air filtered to 40 um; proof pressure is 1.5 MPa (215 psi) and speed spans 30-800 mm/s.
Back both needle screws fully off before first run, then close them gradually until the 200 mm stroke stops cleanly - this bleed sets the variable air cushion at each end. The CA pivot eye takes a clevis pin directly, and the standard-built magnet accepts CMSG, DMSG and EMSG switches anywhere along the barrel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.