Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X25
The AirTAC B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X25 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 25mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke25 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X25
The AirTAC B06-SAID32X25 is a double-acting, double-rod ISO 15552 profile cylinder. The "B06-" prefix designates it as AirTAC's battery-manufacturing dedicated variant, mechanically identical to the standard SAID32X25. Because a rod exits both ends, the annulus area is symmetrical, yielding equal push and pull forces of 345 N each way at 0.5 MPa.
This through-rod design is ideal for battery cell stacking and tabbing where dual-side guidance prevents rotation. The extruded aluminum barrel features sensor grooves on both sides for flexible CMSE or DMSE switch mounting. It uses adjustable air cushions at both ends (27 mm stroke) and a PT G1/8 port.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X25 Technical Specifications
| Model | Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X25 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X25
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X25 Is Used
Battery Cell Stacking
Provides symmetric force and anti-rotation guidance for aligning prismatic battery cells precisely during stacking operations.
Twin-Station Transfer
Drives two synchronized tooling points simultaneously using both rod ends for balanced module handling on the assembly line.
Tab Positioning
Maintains exact linear positioning for battery tab welding, using the rear rod for a limit switch flag to confirm stroke.
Is the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X25 the Right Cylinder?
Choose this 32 mm bore when a battery-handling fixture requires identical 345 N force extending and retracting within a tight 25 mm stroke. If your module assembly needs less force, step down is not an option as 32 is the smallest; to step up, the 40 mm bore provides 528 N both ways. Select the double-rod SAID over a single-rod SAI when you need to mount a position flag or secondary cam on the rear rod. Note that adjustable cushions decelerate the piston but do not lock the load; for position holding without air pressure, use an external rod lock or BSAID clamp-lock cylinder. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other standard double-rod cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X25 FAQ
Because it is a double-rod cylinder, the effective piston area is identical on both sides. It outputs 345 N in both extend and retract directions at 0.5 MPa, and 621 N both ways at 0.9 MPa.
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SAID32X25, sharing the same ISO 15552 dimensions, G1/8 port, and 25 mm stroke, but is specified for battery assembly applications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X25
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.