Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X75
The AirTAC Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X75 is a genuine double-acting DOUBLE-ROD air cylinder: the Ø25mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø100mm bore, 75mm stroke, PT1/2 ports and adjustable end cushioning.
- BoreØ100 mm
- Rod (both ends)Ø25 mm
- Stroke75 mm
- Port sizePT1/2
- Rod configDouble rod (through)
- CushionAdjustable, 29 mm
About the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X75
The B06-SCD100X75 is an AirTAC double-acting, double-rod cylinder where the B06- prefix designates it for battery-manufacturing lines (cell stacking, module handling). Mechanically, it is identical to the standard SCD100X75. The through-rod design yields equal force and speed in both directions, generating 3681 N of thrust each way at 0.5 MPa and 6626 N at 0.9 MPa.
Because the Ø25 mm piston rod exits both end caps, the effective pressure area is balanced. This 75 mm stroke variant features a 29 mm adjustable cushion at each end to decelerate the payload smoothly. The retracted body length is longer than a single-rod SC equivalent, utilizing a body length A(SCD) of 263 mm.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X75 Technical Specifications
| Model | Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X75 |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø100 mm |
| Rod diameter | Ø25 mm (both ends) |
| Stroke | 75 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | 5154 N |
| Max (@1.0 MPa) | 751 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X75
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X75 Is Used
Battery Cell Stacking
Provides equal push and pull force to press and align battery cells during automated stacking processes, ensuring consistent module density.
Dual-Sided Transfer
Uses both rod ends to shuttle battery packs between conveyors, allowing tooling or stopper blocks to mount on the rear side simultaneously.
Non-Rotating Tab Welding
The through-rod offers better anti-rotation resistance than a single rod, maintaining electrode alignment for battery tab welding.
Is the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X75 the Right Cylinder?
Select this 100 mm bore when a battery-assembly station requires substantial equal bidirectional force (3681 N at 0.5 MPa) within a short 75 mm travel. If your module handling demands less thrust, stepping down to an 80 mm bore yields 2268 N. If you only need force in one direction and want a shorter body, a single-rod SC100X75 is preferable. For heavy side loads during cell stacking, a dedicated guided cylinder provides better support than a through rod.
When replacing this unit, match five points: 100 mm bore, 75 mm stroke, PT1/2 port thread, basic mounting (or an SCD subset accessory like F-SC100LB), and no built-in magnet. Note that the adjustable cushions only slow the piston near stroke end; they do not lock or hold a load. If a battery module must remain elevated without live air pressure, fit an external mechanical lock or pilot-operated check valve.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X75 FAQ
The B06- prefix indicates this is an AirTAC cylinder dedicated to battery-manufacturing applications. It is mechanically identical to the standard SCD100X75 double-rod cylinder, offering the same 3681 N equal push and pull force at 0.5 MPa, with no changes to dimensions or seals.
A double-rod cylinder provides identical force and speed in both directions because the rod area is subtracted from both chambers. This allows you to mount tooling on both ends for synchronous two-sided actuation and offers better rod guidance, which is critical for delicate battery cell handling.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.