Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800
The AirTAC Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800 is a genuine double-acting DOUBLE-ROD air cylinder: the Ø25mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø100mm bore, 800mm stroke, PT1/2 ports and adjustable end cushioning.
- BoreØ100 mm
- Rod (both ends)Ø25 mm
- Stroke800 mm
- Port sizePT1/2
- Rod configDouble rod (through)
- CushionAdjustable, 29 mm
About the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800
The B06-SCD100X800 is an AirTAC double-acting, double-rod cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant of the standard SCD100X800. Mechanically identical to the base model, it features a 100 mm bore and an 800 mm stroke. Because the piston rod passes through both end caps, the effective area is identical in both chambers, yielding an equal push and pull force of 3681 N at 0.5 MPa and a robust 6626 N at 0.9 MPa.
This symmetric thrust is highly advantageous for battery cell stacking and module transfer stations that require consistent actuation in both directions. The twin Ø25 mm rods provide enhanced guidance and resist torsional twisting compared to a single-rod design. Equipped with adjustable cushions (29 mm cushion length) and a body length A(SCD) of 263 mm, this cylinder handles the 30-800 mm/s speed range required for automated production lines.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800 Technical Specifications
| Model | Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800 |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø100 mm |
| Rod diameter | Ø25 mm (both ends) |
| Stroke | 800 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | 5154 N |
| Max (@1.0 MPa) | 751 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 100 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800 Is Used
Battery Module Shuttle
Moves battery modules between assembly stations with equal force in both directions, ensuring precise placement without speed variations.
Cell Stacking Press
Utilizes the twin through-rods to apply consistent 3681 N clamping pressure for stacking battery cells during production.
Dual-Tooling Transfer
Mounts tooling on both rod ends to pick and place components simultaneously, doubling throughput in pack assembly lines.
Is the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800 the Right Cylinder?
Choose this 100 mm bore when your battery handling system requires substantial equal bidirectional thrust (3681 N at 0.5 MPa). If your application only needs one-way actuation, stepping down to a single-rod SC100X800 saves space and weight. Conversely, if side loads on the 800 mm stroke are severe, a dedicated guided cylinder is recommended over relying solely on the dual rods for support. To replace this unit, match the 100 mm bore, 800 mm stroke, PT1/2 port thread, basic mounting, and confirm if a magnet is needed.
With an 800 mm stroke, the unsupported rod length is significant. For battery pack assembly lines, always use external linear guides to prevent rod bending under heavy tooling loads, as the double rod improves guidance but cannot substitute for a true guided cylinder under high side-load stress.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800 FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SCD100X800 double-rod cylinder, featuring the same 100 mm bore, 800 mm stroke, and PT1/2 port threads.
A double-rod cylinder provides identical push and pull force (3681 N at 0.5 MPa) because the rod area is subtracted from both sides. It also offers better anti-rotation stability and allows mounting tooling or sensors on both ends, which is ideal for battery line shuttle applications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.