Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X150
The AirTAC Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X150 is a genuine double-acting DOUBLE-ROD air cylinder: the Ø12mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø32mm bore, 150mm stroke, PT1/8 ports and adjustable end cushioning.
- BoreØ32 mm
- Rod (both ends)Ø12 mm
- Stroke150 mm
- Port sizePT1/8
- Rod configDouble rod (through)
- CushionAdjustable, 21 mm
About the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X150
The B06-SCD32X150 is an AirTAC double-acting, double-rod cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant, mechanically identical to the standard SCD32X150. It features a 32 mm bore and a 150 mm stroke, utilizing a 12 mm diameter rod that passes through both end caps. This symmetric design yields an identical push and pull force of 483 N at 0.7 MPa, reaching 621 N at its 0.9 MPa maximum operating pressure.
Because the rod protrudes from both ends, the unit provides enhanced bearing support and natural anti-rotation properties ideal for stacking and handling tasks in cell assembly. The cylinder body length A(SCD) is 187 mm, and it includes adjustable cushions with a 21 mm length to smoothly decelerate the piston at stroke ends. It operates on filtered air at 30-800 mm/s, making it well-suited for the rhythmic cycling of battery module production lines.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X150 Technical Specifications
| Model | Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X150 |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø32 mm |
| Rod diameter | Ø12 mm (both ends) |
| Stroke | 150 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X150
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X150 Is Used
Cell Stacking Pusher
Provides equal 483 N push and pull force to shuttle battery cells precisely into stacking fixtures without rotational drift.
Dual-Tool Transfer
Mounts a gripper on the front rod and a sensor flag on the rear rod to synchronize pick-and-place movements on module assembly lines.
Tab Welding Clamp
Uses the symmetric bearing load of the double rod to apply stable, non-rotating clamping pressure during battery tab welding.
Is the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X150 the Right Cylinder?
Choose this 32 mm bore when your battery handling fixture requires equal thrust in both directions, offering 483 N at 0.7 MPa. If your application needs less force, stepping down is not an option below 32 mm in the SCD series, but if you need substantially more power, the 40 mm bore provides 739 N at 0.7 MPa. If the mechanism only requires one-way actuation and you want a shorter footprint, the single-rod AirTAC SC32X150 is a better fit. For heavy side loads during battery pack transfer, a dedicated guided cylinder is recommended over relying solely on the through-rod guidance.
When replacing this unit, match the 32 mm bore, 150 mm stroke, PT1/8 port thread, basic mounting style, and confirm whether a magnetic piston (-S) is needed for position sensing. Note that the adjustable cushion only decelerates the piston; it does not lock the load. If the battery cell being lifted must stay elevated without live air pressure, an external mechanical lock or pilot-operated check valve is required.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X150 FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated variant of the standard SCD32X150. It is mechanically identical to the base model, featuring the same 32 mm bore, 150 mm stroke, 12 mm rod, and force ratings.
The double-rod design provides identical push and pull force (483 N at 0.7 MPa) because the rod area is subtracted from both chambers. It also offers better anti-rotation stability and allows tooling or sensors to be mounted on both ends, which is often required for battery assembly automation.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.