Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225
The AirTAC Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225 is a genuine double-acting DOUBLE-ROD air cylinder: the Ø12mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø32mm bore, 225mm stroke, PT1/8 ports and adjustable end cushioning.
- BoreØ32 mm
- Rod (both ends)Ø12 mm
- Stroke225 mm
- Port sizePT1/8
- Rod configDouble rod (through)
- CushionAdjustable, 21 mm
About the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225
The B06-SCD32X225 is an AirTAC double-acting, double-rod cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant of the standard SCD32X225. Mechanically identical to the base model, it features a 32 mm bore and a 225 mm stroke. Because the piston rod passes through both end caps, the effective area is identical in both chambers, yielding an equal push and pull force of 483 N at 0.7 MPa.
This symmetric design is highly valued in cell and module assembly for non-rotating dual-tooling actuation. The Ø12 mm rod protrudes from both ends, supported by adjustable cushions that provide 21 mm of end-of-stroke deceleration to protect sensitive battery components. Operating pressure ranges from 0.15 to 1.0 MPa, and the body length A(SCD) is 187 mm.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225 Technical Specifications
| Model | Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225 |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø32 mm |
| Rod diameter | Ø12 mm (both ends) |
| Stroke | 225 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225 Is Used
Cell Shuttle Transfer
Moves battery cells laterally between processing stations using dual tooling mounted on both rod ends to maintain precise parallel alignment.
Tab Welding Clamp
Applies symmetric 345 N clamping force at 0.5 MPa for battery tab welding, ensuring the rear rod absorbs reaction loads without deflection.
Module Sorting Diverter
Diverts battery modules on a conveyor by pushing and pulling a gate from both sides, keeping the mechanism balanced and preventing gate twisting.
Is the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225 the Right Cylinder?
Choose this 32 mm bore when your battery handling line requires 483 N of thrust and pull at 0.7 MPa with a 225 mm stroke. If your application needs less force, stepping down is not an option in the SCD range as 32 mm is the smallest bore; however, if you need significantly more power, the 40 mm bore offers 739 N at 0.5 MPa. If the task only requires one-sided pushing and does not need anti-rotation or a rear rod for tooling, a standard single-rod AirTAC SC cylinder is a simpler, lighter choice. For exact replacements, match the 32 mm bore, 225 mm stroke, PT1/8 port thread, basic mounting, and no magnet. At 225 mm, the unsupported rod length is moderate, but always ensure external guides support any heavy welding fixtures to prevent rod bending.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated cylinder. It is mechanically identical to the standard AirTAC SCD32X225, offering the same 32 mm bore, 225 mm stroke, and 483 N equal push/pull force at 0.7 MPa, without any changes to physical dimensions or seals.
No, the push and pull forces are exactly equal. Because the rod occupies area on both sides of the piston, the effective pressure area is identical in both directions, providing 483 N of force at 0.7 MPa for both extending and retracting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.