Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X75
The AirTAC Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X75 is a genuine double-acting DOUBLE-ROD air cylinder: the Ø12mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø32mm bore, 75mm stroke, PT1/8 ports and adjustable end cushioning.
- BoreØ32 mm
- Rod (both ends)Ø12 mm
- Stroke75 mm
- Port sizePT1/8
- Rod configDouble rod (through)
- CushionAdjustable, 21 mm
About the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X75
The B06-SCD32X75 is AirTAC's battery-manufacturing dedicated variant of the standard SCD32X75 double-rod cylinder, featuring identical mechanical specifications. The B06- prefix simply designates its optimization for battery production lines, such as cell stacking and module handling. As a double-acting, double-rod actuator, the piston rod protrudes through both end caps, yielding perfectly symmetrical thrust and speed in both directions.
This 32 mm bore cylinder generates 483 N of force in both push and pull directions at 0.7 MPa, increasing to 621 N at its 0.9 MPa maximum operating pressure. It features a 12 mm diameter rod on both ends with M10x1.25 threads, PT1/8 ports, and 21 mm adjustable cushions. The body length A(SCD) is 187 mm, making the overall retracted length longer than a comparable single-rod SC cylinder.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X75 Technical Specifications
| Model | Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X75 |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø32 mm |
| Rod diameter | Ø12 mm (both ends) |
| Stroke | 75 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X75
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X75 Is Used
Cell Stacking Pusher
Provides equal 483 N push and pull force at 0.7 MPa to shuttle battery cell layers during stacking, ensuring consistent alignment without rotational drift.
Module Transfer Shuttle
Uses the dual protruding rods to mount opposing grippers for transferring battery modules between conveyor belts in pack assembly lines.
Tab Welding Clamp
Applies 345 N of precise clamping force at 0.5 MPa to hold battery tabs securely during laser welding, utilizing the anti-rotation benefits of the through rod.
Is the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X75 the Right Cylinder?
Choose this 32 mm bore double-rod cylinder when your battery assembly process requires equal force both ways or a rear rod for mounting secondary tooling and sensor flags. If your application needs less thrust, stepping down is not an option below 32 mm in the SCD series, but if you need significantly more force, the 40 mm bore provides 528 N at 0.5 MPa. If you do not require a through rod or equal push/pull forces, a standard single-rod AirTAC SC32X75 is lighter and more compact.
For replacement, match the 32 mm bore, 75 mm stroke, PT1/8 port thread, basic mounting, and magnet option exactly. The 75 mm stroke is short enough that rod bending is minimal, but always ensure the load is guided externally if side loads are present, as a through rod provides better guidance than a single rod but is not a substitute for a true guided cylinder.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X75 FAQ
The B06- prefix indicates this is AirTAC's battery-manufacturing dedicated variant of the SCD32X75. It is mechanically identical to the standard SCD32X75 double-rod cylinder, with the same 32 mm bore, 75 mm stroke, and 483 N force at 0.7 MPa. The prefix simply designates its intended industry use.
A double-rod SCD cylinder provides identical push and pull forces (483 N both ways at 0.7 MPa) because the rod area is subtracted from both chambers. It also offers a rear protruding rod for mounting secondary tooling or sensors, better rod guidance, and resistance to rotation, which is critical for precise battery assembly tasks.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.