Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X250
The AirTAC Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X250 is a genuine double-acting DOUBLE-ROD air cylinder: the Ø25mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø80mm bore, 250mm stroke, PT3/8 ports and adjustable end cushioning.
- BoreØ80 mm
- Rod (both ends)Ø25 mm
- Stroke250 mm
- Port sizePT3/8
- Rod configDouble rod (through)
- CushionAdjustable, 28 mm
About the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X250
The B06-SCD80X250 is an AirTAC double-acting, double-rod pneumatic cylinder engineered for battery manufacturing environments. The B06- prefix designates this as a battery-industry dedicated variant of the standard SCD80X250, meaning it shares the exact same physical specifications. Because the Ø25 mm piston rod passes through both end caps, the effective area is identical in both chambers, yielding an equal push and pull thrust of 2268 N at 0.5 MPa (3175 N at 0.7 MPa).
With a 250 mm stroke, this model provides a balanced 250 mm travel distance for transferring battery cells or modules. The through-rod design improves bearing load distribution and offers anti-rotation benefits compared to a single-rod actuator. It features a PT3/8 port, adjustable cushions with a 28 mm length on both ends to decelerate the payload smoothly, and a body length A(SCD) of 257 mm.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X250 Technical Specifications
| Model | Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X250 |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø80 mm |
| Rod diameter | Ø25 mm (both ends) |
| Stroke | 250 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | 3175 N |
| Max (@1.0 MPa) | 463 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X250
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 80 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X250 Is Used
Cell Shuttle Transfer
Equal push and pull force makes this cylinder ideal for moving battery cells between processing stations on a transfer table.
Dual-Side Tab Welding
The through-rod allows tooling to be mounted on both ends, enabling simultaneous clamping or positioning for battery tab welding.
Module Pallet Stopper
The rear protruding rod can act as a physical stopper or carry a sensor flag to confirm pallet positioning on the line.
Is the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X250 the Right Cylinder?
Choose this 80 mm bore when an application demands substantial equal-force bi-directional motion, such as shuttling heavy battery packs. If your assembly line requires less force, stepping down to a 63 mm bore provides 1402 N at 0.5 MPa. If you only need force in one direction and do not have rear tooling, a standard single-rod AirTAC SC cylinder is lighter and more compact. For loads that impose high lateral stress on the 250 mm stroke, a dedicated guided cylinder is recommended over relying solely on the through-rod for support.
To replace this unit, match the 80 mm bore, 250 mm stroke, PT3/8 port thread, basic mounting style, and non-magnet configuration. Note that the adjustable air cushion only decelerates the piston near the stroke ends; it does not lock or hold the load. If a battery module must remain suspended without live air pressure, an external mechanical lock or pilot-operated check valve must be installed.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X250 FAQ
The B06- prefix indicates this is an AirTAC cylinder dedicated to battery manufacturing applications. It is mechanically identical to the standard SCD80X250 double-rod cylinder, offering the same 80 mm bore, 250 mm stroke, and 2268 N equal push/pull force at 0.5 MPa.
A double-rod cylinder provides identical force and speed in both directions because the rod area is subtracted from both chambers. It also offers better rod guidance, anti-rotation characteristics, and a rear rod for mounting secondary tooling or sensors, which a single-rod SC cylinder cannot provide.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X250
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.