Airtac B06-SDA Battery Dedicated Cylinder B06-SDA32X15SB
The AirTAC Airtac B06-SDA Battery Dedicated Cylinder B06-SDA32X15SB is a genuine double-acting COMPACT (thin) air cylinder with a Ø32mm bore and 15mm stroke, PT1/8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
- BoreØ32 mm
- Stroke15 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM6×1.0 (F) / M10×1.25 (B)
- CushionFixed NBR bumper (both ends)
About the Airtac B06-SDA Battery Dedicated Cylinder B06-SDA32X15SB
The AirTAC B06-SDA32X15SB is a double-acting, single-rod compact cylinder engineered for battery-manufacturing applications. The B06- prefix designates this as a battery-line dedicated variant of the base SDA32X15SB, meaning it is mechanically identical to the standard model but curated for cell, module and pack assembly lines. Delivering 402.1 N of push force at 0.5 MPa, it uses a short riveted body to drastically reduce axial mounting depth where conventional round-body units cannot fit.
This specific unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves, and a male M10x1.25 threaded rod end (-B) for secure load coupling. End-stopping relies on a fixed NBR bumper rather than an adjustable air cushion, ensuring consistent deceleration across its 15 mm travel.
Airtac B06-SDA Battery Dedicated Cylinder B06-SDA32X15SB Technical Specifications
| Model | Airtac B06-SDA Battery Dedicated Cylinder B06-SDA32X15SB |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SDA Battery Dedicated Cylinder B06-SDA32X15SB
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac B06-SDA Battery Dedicated Cylinder B06-SDA32X15SB Is Used
Lithium Cell Stacking
Provides high-cycle precision pressing for lithium-ion prismatic cell stacking machines, utilizing the 402.1 N extend force within a minimal axial footprint.
Module Tab Welding
Clamps battery module busbars and tabs during laser welding, where the male M10x1.25 rod end securely holds the copper interconnects without side-load drift.
Pack Tray Handling
Indexes empty or filled pack trays on conveyor lines, using the integrated magnet and a reed or electronic switch to confirm the 15 mm stroke position.
Is the Airtac B06-SDA Battery Dedicated Cylinder B06-SDA32X15SB the Right Cylinder?
When sizing this 32 mm bore actuator, step down to the SDA25 for 245.4 N @0.5 MPa or step up to the SDA40 for 628.3 N @0.5 MPa. For this specific model, the computed safe working load is approximately 241 N (60% of the 402.1 N figure), translating to a vertical lift capacity of roughly 20.5 kg with a 2:1 safety margin. Confirm your ordering essentials: 32 mm bore, 15 mm stroke, PT1/8 port, male M10x1.25 rod thread, and the integrated magnet. Note that a plain compact cylinder drifts when air pressure is lost or the valve is centered; the fixed bumper only decelerates the stroke end and does not function as a lock. For battery-handling fixtures that must hold a load without live pressure, specify an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SDA Battery Dedicated Cylinder B06-SDA32X15SB FAQ
This 32 mm bore double-acting cylinder generates 402.1 N push and 345.6 N pull at 0.5 MPa, increasing to 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum push force is 82 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, with a proof pressure of 1.5 MPa, and travels at speeds of 30-500 mm/s.
The B06- prefix simply marks this as the battery-manufacturing dedicated variant of the SDA32X15SB; it shares the exact same physical specs, seals, and materials as the base model. It does not have adjustable air cushions. Instead, it uses a fixed NBR bumper at each end to absorb end-stop impact. For high-speed battery assembly lines, you may need to add an external shock absorber or slow the approach speed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SDA Battery Dedicated Cylinder B06-SDA32X15SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.