This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAI100X200 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAI100X200 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X200
The AirTAC Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X200 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAI100X200, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke200 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAI100X200
About the Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X200
The AirTAC B06-SI100X200 is a discontinued double-acting ISO 15552 profile cylinder. The B06- prefix marks it as the battery-manufacturing dedicated variant of the SI100X200, mechanically identical to the base model. Delivering 3927 N push force at 0.5 MPa through a G1/2 port, it is replaced drop-in by the SAI100X200.
The SAI100X200 maintains the exact ISO 15552 mounting interface, 200 mm stroke, and force. It upgrades the piston seal to two Y-shaped one-way elements for low start-up pressure. Since this SKU lacks the -S magnet, it cannot accept a sensor. Safe working load is roughly 2356 N (60% of 0.5 MPa push), allowing a 200 kg vertical lift with a 2:1 margin.
Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X200 Technical Specifications
| Model | Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X200 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAI100X200 |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAI100X200 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The B06-SAI100X200 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X200
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X200 Is Used
Module Stack Pressing
Applies up to 5497 N at 0.7 MPa to compress and align battery module layers during assembly, ensuring uniform contact and structural integrity.
Pack Line Diverting
Drives heavy diverters on battery pack conveyors, utilizing the 200 mm stroke to route large battery trays between manufacturing zones.
Cell Tray Handling
Actuates lifting arms for loading raw cell trays into formation machines, handling safe working loads around 2356 N without drift issues.
Replacing the Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X200 with the B06-SAI100X200
To replace this discontinued cylinder, order the SAI100X200. Confirm the ISO 15552 mounting interface, 100 mm bore, 200 mm stroke, G1/2 port, and M20x1.5 rod thread. Because this B06-SI100X200 lacks the -S magnet option, it cannot support legacy CS1-B/DS1-B sensors. If sensing is required, specify an SAI with the magnet. For sizing, the 80 mm bore yields 2513 N push at 0.5 MPa, while the 125 mm bore provides 6136 N. Note that a plain cylinder drifts on air loss; for battery pack holding, use the SAIL lock or BSAI clamp-lock variant, or an external pilot check valve. Rod material options include carbon steel, SUS420J2 (A), or SUS304 (B).
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAI100X200
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X200 FAQ
Yes, the B06-SI100X200 is discontinued. The exact drop-in replacement is the SAI100X200. It shares the identical ISO 15552 mounting interface, 100 mm bore, 200 mm stroke, force, and G1/2 port. The B06- prefix simply denotes the battery-manufacturing dedicated variant, and the SAI matches all mechanical specs.
The bore is 100 mm with a G1/2 port. Force ratings are: 3927 N push and 3681 N pull at 0.5 MPa; 5497 N push at 0.7 MPa; 7068 N push at 0.9 MPa; and a theoretical max of 801 kgf at 1.0 MPa. It operates at 30-800 mm/s with a 36 mm adjustable cushion.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAI100X200
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAI100X200 replacement — usually within 7-8 hours.