This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAI100X25 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAI100X25 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X25
The AirTAC Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X25 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 25mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAI100X25, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke25 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAI100X25
About the Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X25
The AirTAC B06-SI100X25 is a discontinued double-acting ISO 15552 profile cylinder. The B06- prefix marks it as a battery-manufacturing dedicated variant, mechanically identical to the base SI100X25. Delivering 3927 N push force at 0.5 MPa through a G1/2 port, it is replaced by the SAI100X25.
The SAI100X25 is a true drop-in upgrade retaining the exact ISO 15552 mounting interface, 25 mm stroke, and M20x1.5 rod thread. It features an upgraded piston seal with two Y-shaped one-way elements for low start-up pressure. Without a magnet, this SKU cannot take a sensor. For safe sizing, expect a 2356 N working load (60% of push) or a 200 kg vertical lift with a 2:1 margin.
Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X25 Technical Specifications
| Model | Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X25 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAI100X25 |
| Bore size | Ø100 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAI100X25 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The B06-SAI100X25 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X25
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X25 Is Used
Cell Stacking Press
Applies the 3927 N push force at 0.5 MPa to align and compress lithium-ion cell stacks during module assembly.
Pack Handling Stop
Acts as a short-stroke 25 mm stopper gate for battery packs moving along assembly conveyors.
Tab Welding Clamp
Holds battery tabs firmly in place for ultrasonic welding, utilizing the 801 kgf maximum theoretical force.
Replacing the Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X25 with the B06-SAI100X25
To replace this discontinued battery-line cylinder, order the SAI100X25. It drops directly into existing ISO 15552 fixtures with the same 100 mm bore, 25 mm stroke, G1/2 port, and mounting accessories. Confirm your port thread (PT, G, or NPT) and note this non-magnetic SKU cannot accept CS1-B/DS1-B sensors. If sizing down, a 80 mm bore yields 2513 N at 0.5 MPa; sizing up to 125 mm provides 6136 N. For battery pack assembly requiring load holding on air loss, the cushion only decelerates; use an external pilot check valve or the SAIL/BSAI lock variants.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAI100X25
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X25 FAQ
Yes, the B06-SI100X25 (a battery-manufacturing dedicated variant of the SI100X25) is discontinued. The exact drop-in replacement is the SAI100X25. It shares the identical ISO 15552 mounting interface, 100 mm bore, 25 mm stroke, output force, G1/2 port, and mounting accessories, fitting existing fixtures perfectly.
The G1/2 port is fixed by the 100 mm bore. It delivers 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and 7068 N push at 0.9 MPa, with a theoretical max of 801 kgf at 1.0 MPa. Operating speed is 30-800 mm/s.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAI100X25
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAI100X25 replacement — usually within 7-8 hours.