This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAI32X200S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAI32X200S in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI32X200S
The AirTAC Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI32X200S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAI32X200S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B06-SAI32X200S
About the Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI32X200S
The AirTAC B06-SI32X200S is a discontinued double-acting ISO 15552 profile cylinder. The B06- prefix designates it as the battery-manufacturing dedicated variant of the SI32X200S, mechanically identical to the base model with a 32mm bore, 200mm stroke, and 402N push force at 0.5MPa. AirTAC replaced this EOL unit with the SAI32X200S, a true drop-in replacement sharing the exact ISO 15552 mounting interface, G1/8 port, and M10x1.25 rod thread.
The SAI upgrade introduces a refined piston seal utilizing two Y-shaped one-way elements for low start-up pressure and extended life. For battery line upgrades, the SAI family adds variants the SI lacked, such as the SAIL air-released lock and BSAI clamp-lock for secure load holding. Based on the 402N thrust, expect a safe working load around 241N or a 20kg vertical lift with a 2:1 margin.
Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI32X200S Technical Specifications
| Model | Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI32X200S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAI32X200S |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAI32X200S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B06-SAI32X200S produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI32X200S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI32X200S Is Used
Cell Stacking Press
Applies the 402N push force for stacking prismatic battery cells, ensuring precise alignment without damaging delicate modules.
Module Handling
Transfers battery modules along the pack assembly line with a 200mm stroke, fitting existing ISO 15552 fixtures seamlessly.
Tab Welding Clamp
Secures battery tabs during laser welding, using the G1/8 port for high-speed 30-800 mm/s actuation.
Replacing the Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI32X200S with the B06-SAI32X200S
To replace the B06-SI32X200S, order the SAI32X200S. Confirm the ISO 15552 interface, 32mm bore, 200mm stroke, G1/8 port, and the -S magnet for CS1-B/DS1-B legacy sensors (the SAI uses current AirTAC switches). Sizing both ways: a 40mm bore yields 628N push at 0.5MPa, while dropping to a 25mm bore reduces force. Note that a plain cylinder drifts on air loss; the cushion only decelerates. For battery cell stacking requiring held loads, use the SAIL lock or an external pilot check valve. At 200mm stroke, guide rods are recommended to prevent side-load bending.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAI32X200S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI32X200S FAQ
Yes, the B06-SI32X200S is discontinued. The exact drop-in replacement is the SAI32X200S. It is dimensionally interchangeable per ISO 15552, retaining the same 32mm bore, 200mm stroke, force, G1/8 port, and mounting interface. The B06- prefix simply marked it as the battery-manufacturing dedicated variant.
The 32mm bore features a G1/8 air port and M10x1.25 rod thread. Force output is 402N push and 345N pull at 0.5MPa, 563N push at 0.7MPa, 724N push at 0.9MPa, with a theoretical max of 82kgf at 1.0MPa. Operating speed is 30-800 mm/s.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAI32X200S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAI32X200S replacement — usually within 7-8 hours.