This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAI32X75 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAI32X75 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI32X75
The AirTAC Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI32X75 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 75mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAI32X75, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B06-SAI32X75
About the Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI32X75
The AirTAC B06-SI32X75 is a discontinued double-acting ISO 15552 profile cylinder. The B06- prefix marks it as a battery-manufacturing dedicated variant of the SI32X75, mechanically identical to the base model with a 32mm bore, 75mm stroke, and 402N push force at 0.5 MPa. AirTAC replaced this legacy unit with the SAI32X75, a true drop-in sharing the same ISO 15552 mounting interface, G1/8 port, and M10x1.25 rod thread.
The SAI32X75 upgrade features an improved piston seal with two Y-shaped one-way elements for low start-up pressure and extended life. For battery line integration, the safe working load is roughly 241N (about 60% of the 402N figure), translating to a vertical lift capacity of approximately 20kg with a 2:1 margin. Note this no-S SKU lacks a magnet and cannot take a sensor; the SI family used CS1-B/DS1-B switches. For load holding, explore the SAIL or BSAI lock variants, as standard cushions only decelerate.
Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI32X75 Technical Specifications
| Model | Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI32X75 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAI32X75 |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAI32X75 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B06-SAI32X75 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI32X75
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI32X75 Is Used
Cell Stacking Alignment
Positions prismatic cells during stacking and alignment processes in module assembly, utilizing the 241N safe working load for precise, low-force placement.
Tab Handling & Sorting
Drives small transfer mechanisms for battery tab sorting and feeding on high-speed production lines, operating efficiently at 30-800 mm/s.
Pack Fixture Clamping
Actuates light-duty clamping fixtures during battery pack frame assembly, benefiting from the drop-in ISO 15552 mounting compatibility.
Replacing the Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI32X75 with the B06-SAI32X75
To replace the B06-SI32X75, order the SAI32X75, confirming the ISO 15552 mounting interface, 32mm bore, 75mm stroke, and G1/8 port. Because this is a no-S SKU, it cannot accept a magnetic sensor; if position detection is required, select an SAI32X75S and use current AirTAC switches. Size both ways: a 40mm bore offers 628N push at 0.5 MPa, while dropping to a smaller bore reduces force. For battery manufacturing tasks, the 32mm bore provides a safe working load of 241N and a 20kg vertical lift capacity. A plain cylinder drifts on air loss, so for load holding use an external pilot check valve or the SAIL/BSAI lock variants. The 75mm stroke is short, so side-load risks are minimal, but always verify rod alignment.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAI32X75
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI32X75 FAQ
Yes, the B06-SI32X75 is discontinued. The exact drop-in replacement is the SAI32X75. It features the same ISO 15552 mounting interface, 32mm bore, 75mm stroke, output force, and G1/8 port. The B06- prefix simply designates it as a battery-manufacturing dedicated variant, and the SAI replacement is mechanically identical.
The 32mm bore features a G1/8 air port and an M10x1.25 rod thread. Force output is 402N push and 345N pull at 0.5 MPa, 563N push at 0.7 MPa, 724N push at 0.9 MPa, and a theoretical maximum of 82kgf at 1.0 MPa. Operating speed is 30-800 mm/s.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAI32X75
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAI32X75 replacement — usually within 7-8 hours.