Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI50X700S
AirTAC B06-SI50X700S Battery-Optimized ISO Cylinder Specifications
- Model: B06-SI50X700S
- Series: B06-SI (Battery Application Special)
- Bore size: Ø50 mm
- Stroke: 700 mm
- Operating pressure: 0.05–1.0 MPa
- Cushioning: Adjustable pneumatic cushion (dual side)
- Mounting type: Basic type (axial mounting holes)
- Port size: G3/8 (ISO standard)
- Piston rod thread: M16×1.5
- Ambient temperature: -20℃ to 80℃
- Tube material: Anodized aluminum alloy
- Rod material: Hard chrome-plated steel
- Seal material: NBR + Special low-friction compound
- Lubrication: Pre-lubed (DIN standard VDL)
- Protection rating: IP67 (wipers included)
- Weight: 3.85 kg ±2%
- Dimensions (L×W×H):
- Retracted length: 897 mm
- Extended length: 1597 mm
- Body width: 64 mm
- Mounting height: 50 mm
Engineered for battery-powered automation systems, this ISO 15552-compliant cylinder features 23% reduced friction compared to standard models through precision-machined guides and proprietary seal geometry. The energy-efficient design minimizes air consumption (up to 18% less than conventional cylinders) while maintaining 50,000km+ service life under continuous operation.
- Lithium battery module assembly presses
- Mobile AGV docking mechanisms
- Solar panel handling robots
- Battery swapping stations (EV applications)
- Portable pneumatic test equipment
Installation protocol:
Requires parallel alignment verification using 0.02mm/m precision level during mounting.
Lubricate rod every 500km stroke travel using ISO VG32-grade oil. Maintain 15mm minimum side clearance for heat dissipation.
| Property | Property Value |
|---|---|
| sku | B06-SI50X700S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.