Airtac B07-TCM Automotive-Specific Triaxial Cylinder B07-TCM40X30S
AirTAC B07-TCM40X30S Automotive Triaxial Cylinder Specifications
- Model: B07-TCM40X30S
- Type: ISO-standard triple-axis pneumatic cylinder (X/Y/Z motion)
- Bore diameter: 40mm (precision honed tube)
- Stroke: 30mm per axis (adjustable via mechanical stops)
- Operating pressure: 0.1–0.9 MPa
- Cushioning: Adjustable air cushion at both ends
- Port size: G1/8 (NPT1/8 optional)
- Piston rod material: Hard chrome-plated steel (HRC 45-50)
- Tube material: Aluminum alloy with hard anodized surface
- Seal type: High-temperature NBR seals (-20℃ to 120℃)
- Weight: 2.8kg ±3% (without accessories)
- Dimensions: 300mm(L) × 150mm(W) × 100mm(H)
- Repeat accuracy: ±0.1mm (under 0.5MPa)
- Maximum speed: 500mm/s (with cushioning)
- Mounting: ISO 15552 standard mounting slots
Heavy-duty triaxial actuator engineered for automotive production lines, featuring synchronized multi-directional positioning with integrated guide rails. The nickel-plated end caps and IP67-rated construction resist oil mist and welding spatter. Includes magnetic piston for position feedback compatibility.
- EV battery module assembly positioning
- Welding fixture multi-axis alignment
- Engine component testing equipment
- Dashboard subassembly clamping systems
- Robotic tool changer interfaces
Installation guidelines:
Lubricate with ISO VG32 turbine oil before initial operation.
Maintain 0.3mm minimum clearance between parallel units.
Use anti-vibration mounts in robotic welding environments.
Critical note:
Requires 5μm filtered compressed air with automatic drain.
Avoid angular loads exceeding 2° misalignment.
Torque limit: 15N·m on mounting bolts.
| Property | Property Value |
|---|---|
| sku | B07-TCM40X30S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.