Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC400C10NW
The AirTAC Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC400C10NW is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
About the Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC400C10NW
GC400C10NW is a genuine AirTAC G-series three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one set. The 400 size carries PT 3/8 in ports. This configuration is the 5 um (W) filter grade, the differential-pressure drain (the standard drain that responds to water buildup in the bowl) and the N code, which means no gauge is fitted. It removes water and particulate from compressed air, holds a set downstream pressure and meters oil mist into the line. Maximum working pressure is 1.0 MPa (145 psi); working temperature is -5 to 70 C, non-freezing. The 400-size bowls are polycarbonate (PC).
This is a genuine AirTAC part. The G-series F.R.L. line spans 200, 300, 400 and 600 sizes with ports from 1/8 in to 1 in, 40 um standard or 5 um (W) filtration, automatic, manual and differential-pressure drain variants, and gauge options on regulator-equipped sets. Flow is published as curves rather than a single rated figure, so ask us to confirm sizing and datasheet figures for your application.
Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC400C10NW Technical Specifications
| Model | Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC400C10NW |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC400C10NW
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-C1 filter, GR400-C1 regulator and GL400-C1 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · See datasheet · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-C1 |
| Build order | Filter → regulator → lubricator |
Where the Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC400C10NW Is Used
CNC machining center air supply
Feeds filtered, regulated and lubricated air to a machining center's tool-change cylinders and pneumatic clamps, where the 5 um grade protects the directional valves controlling the tool changer.
Packaging machine valve island feed
Supplies the valve manifold on a cartoning or wrapping machine, giving the seal jaws and product pushers one point of filtration, pressure setting and oil-mist lubrication.
Robotic pick-and-place grippers
Conditions the air feeding end-of-arm gripper cylinders on a robotics cell, keeping water and fine particles out of the small control valves that cycle the grippers.
Is the Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC400C10NW the Right Station?
Size 400 with PT 3/8 in ports suits lines plumbed at that size; step down to 300/200 or up to 600 as your flow requirement changes, since port size and flow capacity rise together through the range. The W code selects the 5 um filter grade for air feeding sensitive directional valves and cylinders; 40 um is the standard grade on non-W codes. The drain here is the differential-pressure type (default); automatic (A) and manual (M) drains are separate codes. The N code means no gauge is fitted; round and square gauges with MPa, psi or bar scales can be ordered on regulator-equipped sets. Thread is PT as the standard; G (BSPP) and NPT are catalogue options to order. Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-C1 regulator with a GF400-C1 filter on that branch.
Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC400C10NW FAQ
AirTAC publishes flow for G-series units as curves rather than a single rated figure, so there is no one rated flow number we can quote. Tell us your line pressure and demand and we will confirm the sizing against the datasheet curves on request before you order.
The N in GC400C10NW means no gauge is supplied with the regulator. Gauges are a catalogue option on regulator-equipped G-series units: an external round gauge or an embedded square gauge, with MPa, psi or bar scales, ordered under the matching code.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC400C10NW
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.