The AirTAC Airtac BFR Air Filter Regulator BFR3000JNG is a genuine A/B-line filter regulator with PT3/8" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob. Flow is confirmed from the datasheet on request.
The BFR3000JNG is an AirTAC compact B-line filter regulator: one body that removes water and particulate from compressed air and regulates downstream pressure. This configuration carries a 3/8 in G(BSPP) port, the standard 40 um filter element, and a bowl drained by differential pressure or by hand via the manual drain. The standard pressure type handles a maximum inlet pressure of 1.0 MPa (145 psi) with a regulation range of 0.15-0.9 MPa (20-130 psi), and the trailing N means it comes without a pressure gauge. The polycarbonate bowl is rated -5 to 70 C (non-freezing), and the push-to-lock self-locking knob holds your set pressure against vibration and drift. This is a genuine AirTAC part from the compact A/B line. The same filter-regulator function is available in 1/8 in (1500), 1/4 in (2000), 3/8 in (3000) and 1/2 in (4000) port sizes, so you can size the body to the air demand of the circuit. Flow figures are not published as a single rating; ask us and we will confirm the datasheet values for this exact model before you order.
| Model | Airtac BFR Air Filter Regulator BFR3000JNG |
|---|---|
| Type | Filter Regulator |
| Line | B-line (compact A/B air preparation) |
| Port size | PT3/8" (G (BSPP) thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Choose B-line over A-line when the 3/8 in port and the larger B body match your required flow - we will confirm the datasheet flow figure for the 3000 size on request so you can size with confidence. The drain here is the default combination of differential-pressure and manual draining; if your compressor runs long duty cycles, an A-suffixed model with an automatic drain removes the need to check the bowl. The standard element is 40 um; specify W for the 5 um grade if downstream valves or cylinders need finer filtration. If your circuit regulates below 0.4 MPa, look at the L low-pressure type. The N in this code means no gauge is fitted - order a gauge variant if you want a visible set pressure. PT is the standard thread; this unit is ordered with G(BSPP), and NPT is also available to order. Because flow is not a single rated figure, send us your air demand and we will confirm sizing before you order.
Feeding filtered, regulated air to the tool-clamp and chip-clearing circuits of a CNC machining center, where the 40 um element protects the chuck and blast valves from water and swarf-laden compressor air.
Supplying steady pressure to the pneumatic cylinders and vacuum generators on a carton-forming and sealing conveyor, keeping seal-press actuation consistent shift after shift.
Conditioning air for the fill, capping and reject-gate actuators on a bottling line, with the polycarbonate bowl capturing condensed water before it reaches the valves.
AirTAC does not publish flow as a single rated figure for the compact B-line filter regulators, so we do not state a number here. Send us your circuit's air demand and we will confirm the datasheet flow figures for the 3000 size before you order, so you can verify the unit is sized correctly.
N means this filter regulator is supplied without a pressure gauge, and G means the 3/8 in port is G (BSPP) thread rather than the PT standard. If you want a visible set pressure on the regulator, order a variant with a gauge and choose the scale you prefer; G and NPT thread options are available to order.