Airtac DS1H Electronic Sensor DS1HLP020
2. Its architecture typically integrates four key components: a temperature sensing probe, signal processing unit, LCD display module, and regulated power supply system.
3. Employing high-precision, fast-response thermistors as its core sensing component, the probe's design directly determines measurement accuracy (±0.5% F.S. typical) and achieves response times under 100ms in standard operating conditions.
AirTAC DS1H Electronic Sensor DS1HLP020 Technical Specifications
- Model: DS1HLP020
- Type: Inductive proximity sensor (shielded)
- Sensing distance: 2.0mm ±10% (20mm optional through firmware)
- Output configuration: NPN NO/NC or PNP NO/NC (selectable via DIP switch)
- Supply voltage: 10-30V DC (±10% ripple)
- Current consumption: ≤15mA (no load)
- Response frequency: 1kHz (metal target)
- Hysteresis: ≤15% of sensing distance
- Protection rating: IP67 (IP69K with optional coating)
- Housing material: Nickel-plated brass (sensing face: PBT resin)
- Temperature range: -25℃ to +85℃ (non-freezing)
- Vibration resistance: 10-55Hz @ 1.5mm amplitude
- Shock resistance: 100m/s² (3-axes, 11ms duration)
- Connection: 2m PUR cable (M8/M12 connector optional)
- Weight: 78g ±3g (with cable)
- Dimensions: 18mm(D) × 34mm(L) × 8mm(W)
High-precision inductive sensor featuring temperature compensation and overload protection circuitry. The DS1HLP020's tri-state output indicator (power/status/error) enables quick diagnostics. Its compact cylindrical design allows embedded installation in metal structures while maintaining EMC compliance (EN 60947-5-2).
- Position verification in CNC tool changers
- End-of-stroke detection in pneumatic actuators
- Sheet metal counting in stamping presses
- Safety interlocks for robotic workcells
- Wear monitoring of rotating machinery components
Installation guidelines:
Maintain 3x sensor diameter clearance from adjacent ferrous materials.
For flush mounting applications, use factory-calibrated sensing distance.
Apply thread sealant only on non-active surfaces to prevent resin contamination.
| Property | Property Value |
|---|---|
| sku | DS1HLP020 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.