The AirTAC Airtac GAF Air Filters GAF200C06AG is a genuine compressed-air filter. Its diversion structure spins the air to separate liquid water and trap solid particles down to 40 µm, protecting downstream valves and tools. It has 1/8" ports and a 25 cc drain bowl. It is a filter only — it does not regulate or set pressure.
The GAF200C06AG is an AirTAC air filter only: it separates liquid water and solid particles from compressed air. There is no regulator, no pressure gauge and no adjusting knob on this unit, so it never sets or holds a pressure. Inside, a diversion structure spins the incoming air so condensate and grit are flung into the drain bowl, while the 40 um HDPE element catches the finer grain before air reaches your valves, cylinders and tools. This is the smallest stocked body in the GAF range with a 1/8" port in the G thread standard, a metal drain bowl holding 25 cc of condensate, and a weight of just 200 g. A mounting bracket is included so the filter can be fixed to a panel or frame instead of hanging on the tubing. Keep it first in the air-preparation train so any downstream device receives clean air.
| Model | Airtac GAF Air Filters GAF200C06AG |
|---|---|
| Series | GAF200 air filter |
| Port size | 1/8" (G thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Bracket | Included |
| Fluid | Air |
|---|---|
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Element | HDPE filter core |
| Weight | 200 g |
Specifications follow the official AirTAC GAF catalogue (pages 225-226). Air must not freeze in the unit. This is a filter only — it separates water and solid particles but does not set or hold a downstream pressure. To regulate pressure as well, use the matching GAFR200 filter-regulator.
| GAF200 | GA200 series air filter — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| (blank) | Mounting bracket included. |
| (blank) | Filtering grade 40 µm. |
| G | G port thread. |
A GAF has no regulator and no pressure gauge — there is no type, gauge or reflux code. Need to regulate pressure too? The matching GAFR200-06 is the same filter with a built-in regulator.
Figures are the end of the flow curve plotted in the AirTAC catalogue — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. A filter this size drops less pressure at flow than the same-body GAFR filter-regulator, so match it to your peak demand.
| This model | GAF200 · 1/8" · curve to 3000 L/min |
|---|---|
| One size up | GAF300 (curve to 6000 L/min) |
| Add regulation | GAFR200-06 (filter + regulator) |
A 1/8" port with a 3000 L/min curve suits point-of-use filtration at a single jig, keeping grit out of one compact actuator or clamping valve.
The metal bowl and automatic drain let a laboratory air line run unattended, and the 40 um element protects sensitive test instrumentation from visible dirt and water.
Mounted on the included bracket above one air tool or blow gun, this 200 g filter spins out daily condensate without a technician opening the drain.
Pick this code when your line needs 1/8" ports in G thread, a 40 um general-purpose element and hands-free condensate removal: the A code fits an automatic drain, so the unit dumps the 25 cc metal bowl on its own and suits wet or unattended installations. If you would rather drain by hand, drop the A for the semi-auto plus manual version; add W if a finer 5 um element is needed; add J to remove the included mounting bracket. For larger ports step up to GAF300 (1/4" to 1/2", 60 cc bowl) or GAF400 (100 cc bowl). Should the line also require a set pressure, choose the matching GAFR200 in the same port, because a plain GAF does not regulate. The flow curve is plotted to 3000 L/min for this body, exactly 2x below GAF300's 6000 L/min envelope, so size up one body when demand doubles.
Quick checklist
This is a filter only — it removes water and solid particles but adds no pressure control and no lubrication. Add a GAR regulator, a GAL lubricator, or step up to the GAFR200-06 filter-regulator as your air-prep needs grow.
It is a filter-only unit with a 40 um HDPE element, a 1/8" port in G thread and a metal drain bowl of 25 cc. The working pressure range is 0.15-0.9 MPa (20-130 psi) with a proof pressure of 1.5 MPa (215 psi), the temperature range is -5 to 70 C, and the body weighs 200 g. The flow curve is plotted to 3000 L/min. It contains no regulator and no gauge.
The C in the code selects the metal bowl option, a build choice some buyers make for their environment; AirTAC rates the same pressure and temperature figures for PC, nylon and metal bowls, so confirm material compatibility with your surroundings from the datasheet. The A selects an automatic drain that ejects collected condensate from the 25 cc bowl without manual effort, which is useful where the filter sits in a hard-to-reach spot or on a line that runs unattended.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.