AirTAC GC300-08 FRL Unit (GC30008MC2)
The AirTAC AirTAC GC300-08 FRL Unit (GC30008MC2) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade40 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
About the AirTAC GC300-08 FRL Unit (GC30008MC2)
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, pressure regulator and lubricator mounted together to clean, regulate and oil-mist lubricate a compressed-air line in one station. This GC30008MC2 is the 300 size with 1/4 in PT ports, a manual-drain filter bowl, the standard 40 um filter element, and a round pressure gauge reading in psi.
This is a genuine AirTAC part, rated for compressed air at a maximum working pressure of 1.0 MPa (145 psi) and a temperature range of -5 to 70 C (non-freezing). At size 300 the filter and lubricator bowls are polycarbonate (PC); aluminium bowls apply at size 600. With manual drain the regulator adjustment range is 0.05-0.9 MPa (7-130 psi). G-series flow is published as curves rather than a single rated figure, so ask us and we will confirm sizing and datasheet figures on request.
AirTAC GC300-08 FRL Unit (GC30008MC2) Technical Specifications
| Model | AirTAC GC300-08 FRL Unit (GC30008MC2) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GC300-08 FRL Unit (GC30008MC2)
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-08 filter, GR300-08 regulator and GL300-08 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/4" · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-08 |
| Build order | Filter → regulator → lubricator |
Where the AirTAC GC300-08 FRL Unit (GC30008MC2) Is Used
Plant-floor air drops
Serve a row of assembly-station air drops in a factory, giving each operator one point where the supply is filtered, regulated and lubricated.
Maintenance shop pneumatic tools
Feed impact wrenches, ratchets and air hammers at a maintenance bench, protecting the tools with clean, oiled air at a set pressure.
Truck service bay
Condition the shop air supplying tyre chucks, lifts and air tools in a commercial-vehicle service bay, with the psi-scaled gauge matching US workshop gauges.
Is the AirTAC GC300-08 FRL Unit (GC30008MC2) the Right Station?
The 300 size with 1/4 in PT ports suits general machine supply lines; step up to 400 or 600 with 1/2 to 1 in ports for heavier demand, or down to 200 for compact points of use. Manual drain needs someone to empty the bowl - choose automatic (A) or the default differential-pressure drain for unattended installations. No W in this code means the standard 40 um element; add W for the finer 5 um grade. The C2 gauge is an external round gauge scaled in psi; F codes give the embedded square gauge and scale 3 reads in bar. PT is the standard thread; G (BSPP) and NPT versions are catalogue options to order. Because flow is published as curves and not one rating, ask us to confirm the unit against your air demand before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-08 regulator with a GF300-08 filter on that branch.
AirTAC GC300-08 FRL Unit (GC30008MC2) FAQ
AirTAC publishes G-series flow as performance curves rather than a single rated figure, so we do not quote one number. Share your line pressure and expected demand and we will confirm the flow data from the datasheet on request.
The M code selects a manual drain: an operator empties the filter bowl, which keeps the unit simple and cost-effective. For unattended lines choose the A code for automatic drain, or no drain letter for the default differential-pressure drain.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GC300-08 FRL Unit (GC30008MC2)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.