AirTAC GC300-08 FRL Unit (GC30008MLC1W)
The AirTAC AirTAC GC300-08 FRL Unit (GC30008MLC1W) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
About the AirTAC GC300-08 FRL Unit (GC30008MLC1W)
GC30008MLC1W is an AirTAC G-series three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator built into one 300-size set. The W in the code selects the finer 5 um filter element instead of the standard 40 um. This 1/4 in PT-threaded unit is the low-pressure (L) type, has a manual drain on the filter bowl, and is fitted with an external round pressure gauge scaled in MPa. On this 300 size the bowl is polycarbonate (PC). Medium is compressed air, with a maximum working pressure of 1.0 MPa (145 psi) and an operating temperature of -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The G series runs from size 200 through 600 with a choice of ports, drain types, filter grades, gauge styles and scales, and G (BSPP) or NPT thread options. The standard manual-drain regulator adjusts 0.05-0.9 MPa (7-130 psi); as the low-pressure (L) variant this set is intended for lower setting pressures, so confirm the exact range with us. Flow is published as curves rather than a single rating, so ask us to confirm datasheet figures for your application.
AirTAC GC300-08 FRL Unit (GC30008MLC1W) Technical Specifications
| Model | AirTAC GC300-08 FRL Unit (GC30008MLC1W) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GC300-08 FRL Unit (GC30008MLC1W)
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-08 filter, GR300-08 regulator and GL300-08 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/4" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-08 |
| Build order | Filter → regulator → lubricator |
Where the AirTAC GC300-08 FRL Unit (GC30008MLC1W) Is Used
Lab automation actuators
Feeds the pneumatic grippers and lifters on laboratory automation benches, where the 5 um element helps keep fine particles out of sensitive pilot valves.
Assembly cell pick-and-place
Prepares air for the pick-and-place cylinders in a small assembly cell, with the low-pressure regulator set to gentle operating pressures and the gauge read in MPa.
Printing press control valves
Supplies the control-air circuit of an offset printing press, combining fine 5 um filtration, pressure regulation and oil mist for the machine's directional valves.
Is the AirTAC GC300-08 FRL Unit (GC30008MLC1W) the Right Station?
Size and port come first: the 300 series on a 1/4 in PT port suits lighter-duty circuits, and 200, 400 or 600 sizes step capacity down or up - match the set to the air demand downstream. This is the low-pressure (L) type for lower setting pressures; confirm the adjustment range with us before ordering. The W code gives you the 5 um element instead of the standard 40 um grade - worth it when valves and cylinders downstream are sensitive to finer particles, at the cost of more frequent element checks. The drain is manual (M), so plan to empty the bowl by hand, or choose differential-pressure or automatic (A) draining instead. Gauge is this external round type (C) in MPa scale; square (F) and psi or bar scales are options, as are G (BSPP) and NPT threads. Flow is published as curves, not a single rating, so let us confirm sizing against your application before you order.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-08 regulator with a GF300-08 filter on that branch.
AirTAC GC300-08 FRL Unit (GC30008MLC1W) FAQ
Flow for the G series is published as performance curves rather than a single rated figure, so we do not state one number here. Share your working pressure and required air consumption and we will confirm the flow from the datasheet before you order.
The standard GC filter element is 40 um. The W code upgrades it to 5 um, which suits circuits with fine pilot valves or sensitive actuators. If you only need bulk water and particle removal ahead of a regulator, the standard 40 um grade is usually the simpler choice - we can help you decide against your application.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GC300-08 FRL Unit (GC30008MLC1W)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.