AirTAC GC300-10 FRL Unit (GC30010ALNW)
The AirTAC AirTAC GC300-10 FRL Unit (GC30010ALNW) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 5 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizePT3/8"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainAutomatic drain
- Bowl materialPC
- Pressure gaugeNot fitted
- ThreadPT
About the AirTAC GC300-10 FRL Unit (GC30010ALNW)
GC30010ALNW is a three-piece AirTAC G-series F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one supply set. The size 300 body takes 3/8 inch PT ports as standard, the W code selects the finer 5 um filter element, and the filter bowl drains automatically. The regulator is the low-pressure type for circuits that run below standard settings, and no gauge is fitted. Maximum working pressure is 1.0 MPa (145 psi), the temperature range is -5 to 70 C (non-freezing), and the 300-size bowls are polycarbonate.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600, with ports from 1/8 to 1 inch, G (BSPP) or NPT thread options, differential-pressure, automatic or manual drains, 40 um or 5 um elements, and gauge and check-valve options. The low-pressure regulator's exact adjustment range and all flow figures are published in the datasheet (flow as curves, not a single rating) - ask us and we will confirm them for your application.
AirTAC GC300-10 FRL Unit (GC30010ALNW) Technical Specifications
| Model | AirTAC GC300-10 FRL Unit (GC30010ALNW) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GC300-10 FRL Unit (GC30010ALNW)
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-10 filter, GR300-10 regulator and GL300-10 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT3/8" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-10 |
| Build order | Filter → regulator → lubricator |
Where the AirTAC GC300-10 FRL Unit (GC30010ALNW) Is Used
Analytical sample panels
Feeds cleaner 5 um-grade air to sample-handling and instrument panels on lab and pilot installations that run at reduced pressure.
Fine pneumatic tooling cells
Supplies filtered, regulated, lubricated air to close-tolerance pneumatic tooling on assembly cells operating below standard settings.
Instrument valve actuation
Conditions supply to actuated instrument valves in low-pressure control loops where a finer element helps protect the positioner circuits.
Is the AirTAC GC300-10 FRL Unit (GC30010ALNW) the Right Station?
Step between GC200, GC300, GC400 and GC600 to match the port and flow your line needs; this model gives a 3/8 inch PT connection with automatic drainage and the finer 5 um W-grade element - choose the standard 40 um grade instead if coarse water and particle removal is enough. The L code makes the regulator the low-pressure type; confirm its adjustment band with us if your circuit runs at reduced pressure. No gauge is fitted, and gauge and scale choices exist across the series; G (BSPP) or NPT threads can be ordered instead of PT. Flow is published as curves, not a single rating, so ask us to confirm sizing before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT3/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-10 regulator with a GF300-10 filter on that branch.
AirTAC GC300-10 FRL Unit (GC30010ALNW) FAQ
AirTAC publishes G-series flow as curves in the datasheet, not as a single rated figure, so we do not quote one number here. Tell us your application and we will confirm the sizing and flow data from the datasheet on request.
The W code selects the finer 5 um element, which catches smaller particles than the 40 um standard grade - useful for sensitive downstream components. Both grades are catalogue options on the GC300 series; this unit arrives with 5 um fitted, along with 3/8 inch PT ports, automatic drain and the low-pressure regulator type.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GC300-10 FRL Unit (GC30010ALNW)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.