AirTAC GC300-15 FRL Unit (GC30015ANK)
The AirTAC AirTAC GC300-15 FRL Unit (GC30015ANK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizePT1/2"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainAutomatic drain
- Bowl materialPC
- Pressure gaugeNot fitted
- ThreadPT
About the AirTAC GC300-15 FRL Unit (GC30015ANK)
GC30015ANK is a genuine AirTAC GC three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator, each installed as its own module in the line. This 300-size set is supplied with a PT1/2 port, an automatic drain on the filter bowl, the standard 40 um filter element and no pressure gauge (N). It is the standard type, and the K suffix adds a reverse (check) valve to the regulator section. All bowls are polycarbonate at this size, the medium is compressed air, and the set works from -5 to 70 C (non-freezing). Max working pressure is 1.0 MPa (145 psi).
AirTAC builds the GC series in 200, 300, 400 and 600 sizes with 1/8 in through 1 in ports, a choice of G (BSPP) or NPT threads as catalogue options, automatic, manual or differential-pressure drains, 5 um (W) or 40 um filtration, and gauge variants; the K check-valve option is available on regulator-bearing units. Flow for the GC series is published as curves rather than a single rating, so we confirm the datasheet and sizing figures on request.
AirTAC GC300-15 FRL Unit (GC30015ANK) Technical Specifications
| Model | AirTAC GC300-15 FRL Unit (GC30015ANK) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GC300-15 FRL Unit (GC30015ANK)
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-15 filter, GR300-15 regulator and GL300-15 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/2" · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-15 |
| Build order | Filter → regulator → lubricator |
Where the AirTAC GC300-15 FRL Unit (GC30015ANK) Is Used
Hold-down clamps on a stamping press
Supplying conditioned air to hold-down clamps on a stamping press, using the K-suffix reverse (check) valve in circuits where reverse flow is not wanted.
High-volume fastening cell
Filtering, regulating and lubricating the supply to pulse tools and screw feeders in a fastening cell, with a reverse (check) valve in the regulator section.
Bottling-line actuator supply
Conditioning air for filler and capper actuation on a bottling line, with the K-suffix reverse (check) valve fitted in the regulator section.
Is the AirTAC GC300-15 FRL Unit (GC30015ANK) the Right Station?
Choose this code over GC30015AN when your circuit should not allow reverse flow through the regulator - the K suffix fits a reverse (check) valve in the regulator section. Everything else matches the standard configuration: 300-size 1/2 in PT port, automatic drain, 40 um element, no gauge. With the automatic drain fitted, the regulator adjustment range is 0.15-0.9 MPa (20-130 psi). Step to 200 for smaller lines or 400/600 for heavier demand, and order G (BSPP) or NPT thread options if your piping differs.
Flow through the GC series is published as curves, not a single rated figure, so we do not quote a number here. Send us your line pressure, downstream demand and port size and we will confirm the datasheet figures and check the sizing against your application before you order.
Quick checklist
- ✓ Body size for your peak flow (PT1/2" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-15 regulator with a GF300-15 filter on that branch.
AirTAC GC300-15 FRL Unit (GC30015ANK) FAQ
AirTAC publishes GC-series flow as curves, not a single rated figure, so we do not quote a number on this page. Send us your line pressure, downstream demand and port size, and we will confirm the datasheet figures and check the sizing against your application before you order.
It means this unit is fitted with a reverse (check) valve in the regulator section. Use it where the circuit should not permit reverse flow through the regulator; the equivalent code without K, GC30015AN, is the same set without the check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GC300-15 FRL Unit (GC30015ANK)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.