The AirTAC AirTAC GC600C25F2W F.R.L. Combination, PT1 in, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C25F2W is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one complete air-treatment station. This configuration is the size 600 unit with a PT1 (1 in) PT-thread port, a differential-pressure drain on the filter bowl, a 5 um filter element (the W grade, against the 40 um standard), a standard regulator with an adjustment range of 0.15-0.9 MPa (20-130 psi), and an embedded square gauge with a psi scale. The filter bowl on size 600 units is aluminium alloy, and a mounting bracket is included. No reverse/check valve is fitted. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC combination is published in sizes 200, 300, 400 and 600, with port sizes from 1/8 in up to 1 in, PT as the standard thread and G (BSPP) or NPT as order options, a choice of differential-pressure, automatic or manual drain, 40 um or 5 um filtration, and gauge scales in MPa, psi or bar. Flow is published as curves rather than a single rated figure, so ask us and we will confirm the flow and datasheet figures for this exact model on request.
| Model | AirTAC GC600C25F2W F.R.L. Combination, PT1 in, 5 um |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Feeding spray booths and paint lines where the air must be filtered to 5 um, held at a set pressure, and carry a fine oil mist to keep spray equipment lubricated through the shift.
Conditioning the shop-air feed to CNC machines and their pneumatic clamping and tool-change circuits: clean, regulated, lubricated air at the machine header from a single 1 in connection.
Supplying the actuator banks on a bottling or packaging conveyor line, where the differential-pressure drain clears accumulated water automatically and the regulator holds a steady line pressure for consistent cylinder action.
Step up or down through the GC sizes (200/300/400/600) to match the port and the flow your line needs - this is the 600 size with a 1 in PT port, the largest in the range. Choose the drain: differential-pressure (as fitted here), automatic, or manual. Choose the filter grade: 40 um standard or 5 um (this unit carries the 5 um W element). Choose the gauge scale - MPa, psi or bar - and whether the embedded square gauge is enough or you want the optional external round gauge. Thread is PT as standard; G (BSPP) and NPT are order options. A mounting bracket is included with this unit. One honest routing note: flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Tell us your application and we will confirm the flow figures from the datasheet for this exact model on request.
The W code on GC600C25F2W means the 5 um filter grade, the finer of the two published options (40 um is the standard element). The finer element is chosen where downstream valves, cylinders or instruments need cleaner air. If you would rather run the 40 um standard element, that is the same family without the W code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.