The AirTAC AirTAC GC600C25MC2WGK F.R.L. Combination, G1 (1 in) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC600 is a three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package. This configuration is built on the size 600 body with a G1 (1 in) port, a 5 um filter element (the fine grade; 40 um is the standard option), a manual drain on the filter bowl, and a reverse/check valve fitted. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi), and a round gauge reading in psi is fitted so the set pressure can be read directly. Maximum working (inlet) pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C (non-freezing). At size 600 the bowls are aluminium alloy.
This is a genuine AirTAC part. The GC line is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in, and with choices of drain type, filter grade, gauge style and scale, thread form and reverse/check valve. Because flow is published as curves rather than a single rated figure, we confirm the datasheet and flow figures for your application on request.
| Model | AirTAC GC600C25MC2WGK F.R.L. Combination, G1 (1 in) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Feeding a spray-booth air ring where the 5 um element, set regulated pressure and oil misting support consistent finish quality on vehicle panels.
Conditioning the shop-air feed to pneumatic clamps, tool-change cylinders and air blast on a machining centre, with the psi gauge letting setters verify clamping pressure.
Supplying filtered, regulated and lubricated air to carton sealers and pick-and-place cylinders running through a shift, with the check valve holding downstream pressure if the feed dips.
Start with the port and size step: the GC600 carries a G1 (1 in) port, the largest in the range, so step down to GC200/300/400 if your line's air demand is smaller. Choose the drain to match attendance on site: manual drain (this unit) needs someone to open it, while automatic and differential-pressure drains discharge condensate without attention. Choose the filter grade: 40 um is the standard element and 5 um (code W, fitted here) is the finer option for downstream equipment that needs cleaner air. Select the gauge style and scale (square embedded or round external; MPa, psi or bar), the thread form (PT is the standard; G and NPT are order options), and whether a bracket is required - a bracket is included on this unit. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC600 as curves rather than a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow figures from the datasheet on request before you order.
The M in the code specifies a manual drain on the filter bowl: condensate is released by opening the drain, which suits attended installations. Automatic and differential-pressure drains are available as order options if the unit will sit on a line without daily attention.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.