The AirTAC AirTAC GC600C25MLF2WGK F.R.L. Unit, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC600C25MLF2WGK is a three-piece F.R.L. combination that filters, regulates and lubricates compressed air in one assembled set: a separate filter, a separate regulator and a separate oil-mist lubricator. This configuration is built on the size 600 frame with a G1 (1 in) port, G (BSPP) thread, a 5 um filter element for finer water and particulate removal, a manual drain on the filter bowl, a low-pressure type regulator, an embedded square gauge reading in psi, and a reverse/check valve fitted. The metal bowl on the size 600 filter is aluminium alloy, and a mounting bracket is included.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in, and can be ordered with manual, automatic or differential-pressure drains, 40 um or 5 um filter grades, standard or low-pressure regulation, MPa, psi or bar gauge scales, PT, G or NPT threads, and with or without a reverse/check valve. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | AirTAC GC600C25MLF2WGK F.R.L. Unit, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
A 1 in F.R.L. feed serving impact wrenches, nutrunners and air ratchets at assembly stations: the 5 um element keeps fine contamination out of tool motors, the regulator holds the circuit setting, and the lubricator mists oil into the tool air supply.
Feeding the large-bore pneumatic cylinders that drive conveyors, fillers and case packers on a beverage line, where the filter strips water and particulate, the low-pressure regulator suits circuits run at reduced settings, and the lubricator protects cylinder seals and guides.
A plant-air takeoff for large pneumatic actuators on dampers, gates and ladle equipment: the metal-bowl size 600 filter handles the main-line air, the manual drain allows scheduled blowdown during maintenance rounds, and the psi gauge gives operators a local reading.
Start with the port and frame: this unit is size 600 with a G1 (1 in) port, the largest step in the GC range - step down to 200/300/400 if your line runs smaller ports and lower air demand. The 5 um element (code W) suits applications that need finer particulate removal than the 40 um standard; the manual drain means an operator opens the drain valve periodically rather than relying on an automatic or differential-pressure mechanism. The low-pressure type regulator is intended for circuits set well below standard working pressures - its exact adjustment range is not published in the sheet we work from, so confirm it with us. The square gauge is scaled in psi here; MPa and bar scales are also available. Thread is G (BSPP); PT is the catalogue standard and NPT is an order option, so match your pipework before ordering. A bracket is included and a reverse/check valve is fitted on this code.
Because flow is published as curves and not as a single rated figure, we cannot honestly quote one number here - send us your demand and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for this series as curves, not as a single rated number, so we do not state a l/min, SCFM or Cv figure here. Send us your air demand and line conditions and we will confirm the sizing against the datasheet on request before you order.
The trailing G means a G (BSPP) parallel thread on the G1 (1 in) port. PT is the catalogue standard thread and NPT is available as an order option, so choose the thread that matches your existing fittings. This is a specification choice made at ordering, not a delivery matter.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.